Assembly Instructions

18 / 36
The reproduction, distribution and utilization of this document as well as the communication of its contents
to others without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
02.06.2022
Version 1.0
Technical Data
APS-90-Lite
Fig. 9: Do Not Open Label
4.6 Product Labels
I
Identificatio
n
n Label
Fig. 8: Identification label
The identification plate contains the following information:
1 Manufacturer name 2 Production country
3 Production date 4 Serial number / MAC address
5 Certification markings (e.g. CE) 6 Preinstalled licenses
7 Soware / Firmware version 8 Hardware model
9 Part number 10 Product name (e.g. APS-90-Lite)
11 Manufacturer logo
D
o
o No
t
t Ope
n
n Label
The small label with the warning "DO NOT OPEN DEVICE!" at the side of the device with
data matrix code (Fig. 9 /1) provides the serial number/MAC address (Fig. 9 /2) and some
production information in encoded form.
D
o
o No
t
t Open
Opening the device will void the warranty.
Aer assembly, all devices are calibrated. Opening the device changes the assembly
conditions so that the calibration is invalid.
During production it is possible that the lenses are positioned slightly off the center of the
housing cutouts. This is intentional and does not influence the function or quality of the
unit.