Specifications

Rev2.0 2020-11-26

TRANSMITTER-PLC

OUTDOOR KIT

The APsmart Rapid Shutdown System Transmitter-PLC is part of a rapid shutdown solution when paired with

APsmart RSD-S-PLC, a PV module rapid shutdown unit. While powered on, the Transmitter-PLC sends a signal to

the RSD-S-PLC units to keep their PV modules connected and supplying energy.

RSD-S-PLC units automatically enter rapid shutdown mode when the Transmitter-PLC is switched off and resume

energy production when power is restored to the Transmitter-PLC. This solution complies with NEC 690.12

specifications for 2017&2020 and supports the SunSpec signaling for rapid shutdown.

Transmitter-PLC Outdoor Kit includes a Transmitter-PLC with one or two cores, outdoor enclosure, 85-264VAC or

180-550VAC power supply. It could be used in residential or commercial project.

Raising the bar in innovative

DC MLPE solar power systems

① RSD-S-PLC

② Transmitter-PLC Outdoor Kit

③ Inverter

 Meets NEC 2017&2020 (690.12) requirements

 Switching off Transmitter-PLC results in

rapid shutdown of the output of PV modules

 Meets SunSpec requirements

 Equipped with single/dual core

 Optional 85-264VAC power supply

 Optional 180-550VAC power supply

*PV1+

*PV2+

*Only (+)or(-)through core

PAGE 1
Raising the bar in innovative DC MLPE solar power systems TRANSMITTER-PLC OUTDOOR KIT  Meets NEC 2017&2020 (690.
PAGE 2
180-550VAC Power Supply (optional) 85-264VAC Power Supply (optional) Transmitter-PLC Outdoor Kit Main electrical data Input Voltage Main electrical data Input Current 12 VDC Communication PLC 0.8A Power Supply Residential（optional） 85-264VAC Input, 12VDC Output, 90 mm x 17.5 mm x 58.4 mm Commercial（optional） 180-550VAC Input, 12VDC Output, 125.2 mm x 32 mm x 102 mm Core data Max. Current 150A Per core Max. System Voltage 1500VDC Internal Opening for Wires/Outside Dimensions ~29mm/65mm Max.