Datasheet

REV3.0 2021-5-15

DESCRIPTION DIMENSIONS

RSD START KIT

After solar array has installed all photovoltaics

modules, IV curve is usually tested by PV Analyzer to

ensure PV modules are properly installed and solar

array is performing as expected. For the system

installed APsmart Rapid Shutdown solutions, it needs

to connect the RSD Start Kit in series between PV

string and PV Analyzer, and then perform IV curve test

with PV Analyzer after all APsmart RSD-S-PLC

functional to turn on PV modules power.

PAGE 1
RSD START KIT DESCRIPTION DIMENSIONS After solar array has installed all photovoltaics modules, IV curve is usually tested by PV Analyzer to ensure PV modules are properly installed and solar array is performing as expected. For the system installed APsmart Rapid Shutdown solutions, it needs to connect the RSD Start Kit in series between PV string and PV Analyzer, and then perform IV curve test with PV Analyzer after all APsmart RSD-S-PLC functional to turn on PV modules power. REV3.
PAGE 2
TEST SETUP AND PROCEDURE ① As shown above, connect RSD START KIT in series between PV string and PV Analyzer。 ② Use the 12Vdc mobile power supply to power the RSD START KIT through USB port on the side. ③ Wait for 10s after the power LED light on, start IV curve test with the PV Analyzer. TECHNICAL DATA Input Voltage 12Vdc Input Current 0.8A Power Supply 5.5X2.
PAGE 3
ORDER INFORMATION 408008 RSD START KIT (DC Power supply case included, but not battery) 19925 Stevens Creek Blvd, Suite 100, Cupertino, CA 95014 +1 737-218-8486 | info@APsmartGlobal.com | APsmartGlobal.