APSmart Single-Dual Core Transmitter Outdoor Kit Datasheet

Rev2.4 2022-05-27
TRANSMITTER-PLC
OUTDOOR KIT
The APsmart Rapid Shutdown System Transmitter-PLC is part of a rapid shutdown solution when paired with APsmart RSD, a PV
module rapid shutdown unit. While powered on, the Transmitter-PLC sends a signal to the RSD units to keep their PV modules
connected and supplying energy.
RSD units automatically enter rapid shutdown mode when the Transmitter-PLC is switched off and resume energy production
when power is restored to the Transmitter-PLC. This solution complies with NEC 690.12 specifications for 2017&2020 and
supports the SunSpec signaling for rapid shutdown.
Transmitter-PLC Outdoor Kit includes a Transmitter-PLC with one or two cores, outdoor enclosure, 85-264VAC or 180-550VAC
power supply. It could be used in residential or commercial project.
Raising the bar in innovative
DC MLPE solar power systems
 Meets NEC 2017&2020 (690.12) requirements
 Switching off Transmitter-PLC results in rapid
shutdown of the output of PV modules
 Meets SunSpec requirements
 Equipped with single/dual core
 Optional 85-264VAC power supply
 Optional 180-550VAC power supply
*PV1+
*PV2+
*Only (+)or(-)through core
*Only (+)or(-)through core
*PV1+
*PV2+
① RSD
② Transmitter-PLC Outdoor Kit
③ Inverter
① RSD
② Transmitter-PLC Outdoor Kit
③ Inverter
④ Emergency stop button box
(optional): Press the emergency
stop button, the transmitter AC
power supply is disconnected, the
RSD closes the output, and the
system rapid shutdown.