Operator's Manual

Table Of Contents
External Sources
Use ports to charge certain external audio sources.
Examples of external audio sources include portable CD
player, MiniDisc player, or MP3 player.
NOTE: Charging some external audio sources, such as
smart phones and tablets, via audio USB port is not
supported. Attempting to charge device that is not
supported may shut off USB port. Device must be
removed and cycle radio power to recover.
RXA0143013—UN—03JUL14
Auxiliary and USB Input (Example)
Activate AUX Input
NOTE: External audio source can only be selected if
audio device is connected to external AUX input.
Connect external audio source using Auxiliary Input (A)
and press SRC button several times until AUX is
displayed on radio.
Activate USB Input
NOTE: USB audio source can only be selected if USB
device is connected to external USB input.
Connect USB audio source using USB Input (B) and
press SRC button several times until USB is displayed
on radio.
USB Charging
USB port has charging capability of 500 mA. Charging
capability is weakened when also connected to
Bluetooth®.
Adjust AUX Input Volume
Volume for connected external audio source can be
adjusted using radio volume knob after input is selected
as audio source using SRC button.
1.Press SRC button several times until installed audio
source is displayed.
2.Press MENU button. GAIN and current setting is
displayed.
3.Turn volume control knob counterclockwise or
clockwise to adjust value from -9 to +9.
4.Press the MENU button several times to exit the
menu.
Set Up Bluetooth®
Following steps must be performed before Bluetooth®
can be used:
NOTE: Bluetooth® connection only relevant to devices/
external audio sources which are Bluetooth®
enabled.
NOTE: While pairing Bluetooth® device to radio, pairing
process cancels if changes are made to radio (ex:
changing source or frequency).
1.Enable Bluetooth® on device.
2.Press MENU button, on radio faceplate until BT
MODE displays.
3.Wait 2 seconds until BT ON or BT OFF. Turn volume
control knob clockwise or counterclockwise to turn
Bluetooth® on or off. Display window may take up to
5 seconds to change.
4.Press MENU button until display shows CON-TYPE.
Select connection type phone/audio (default).
5.To pair device, press MENU button until BT Pair
displays.
6.Enter pin provided into device.
Pairing process may take up to 5 minutes to complete.
Bluetooth® symbol ashes while pairing takes place.
When device/external audio source is successfully
paired, phone calls and audio streaming can be
received and placed via radio system. Device
information (contact information, call history, music, and
so on) does not transfer to CommandCenter.
For further instructions on how to pair device/external
audio source, select source for connection, and transfer
data. See Set Up Bluetooth® in Bluetooth® Operation -
AM/FM Radios B section of this Operator’s Manual.
KD34109,000078D-19-02OCT19
External Audio Sources - AM/FM Radios B
65-1