Operator's Manual

Table Of Contents
Playback of MP3 or WMA Files
Select directory
Press the key or the key to change up or down to a different
directory. This way, sub-directories can also be accessed. Directories of
the data carrier that do not contain valid audio les are skipped.
Select track
Press the key or the key to select the next or the previous track.
If the current track is already playing for more than 10 seconds, it will be
restarted when the key is pressed once.
Quick scan (audible)
Press the key or the key to start fast-forward or fast reverse playing.
Release the key when the desired point is found.
Random playback (MIX ALL) (all tracks on the data carrier)
Press the 3 key in the key block several times until MIX ALL is
displayed.
MIX is displayed and all tracks of the MP3 data carrier are played back
in random order.
Random playback (MIX DIR) (all tracks of the directory or folder)
Press the 3 key in the key block several times until MIX DIR is displayed.
MIX is displayed and all tracks of the MP3 directory are played back in
random order.
Stop MIX
Press the 3 key in the key block again.
MIX OFF is briey displayed, then MIX is no longer displayed. Playback
will continue normally.
Scan tracks (SCAN TRK) (all tracks on the data carrier)
Play all tracks of the MP3 data carrier in ascending order for approx. 10
seconds each: Press the 4 key in the key block several times until
SCAN TRK is displayed.
Scan tracks (SCAN FLD) (all tracks of the directory or folder)
Play all tracks of the MP3 directory in ascending order for approx. 10
seconds each: Press the 4 key in the key block several times until
SCAN FLD is displayed.
Stop scan, continue playing track:
Press the 4 key in the key block again to stop the scanning process.
SCAN OFF is briey displayed. Playing of the current track continues.
Repeating track or directory (RPT TRK) and (RPT DIR)
Repeate Track:
Press the 2 key in the key block.
RPT TRK is briey displayed, then RPT is displayed. The current track
is repeated until RPT is deactivated.
Repeate Directory:
Press the 2 key in the key block.
RPT DIR is briey displayed, then RPT is displayed. The current
directory is repeated until RPT is deactivated.
Stop Repeating:
Press the 2 key in the key block again.
RPT OFF is briey displayed, then RPT is no longer displayed.
Playback will continue normally.
Playback tracks from playlist
If a playlist has been compiled and saved in the root directory, it can be
played in the PLST mode.
Press and hold the TA key until PLST ON is displayed. Playback of the
rst track of the playlist is started after 2 seconds.
If several playlist are available (all in the root directory), select the
desired playlist using the arrow keys and .
If no playlists are stored on the data carrier, NO PLST is displayed when
the TA key is pressed and held.
While in PLST mode, it is not possible to access other directories. The
PLST mode must be turned off to change directories.
Press and hold the TA key until PLST OFF is displayed. Playback of the
rst track of the rst directory is started after 2 seconds.
Pause playback (PAUSE)
Press the 1 key in the key block. PAUSE is displayed.
Cancel Pause:
Press the 1 key in the key block. Playback will continue.
KD34109,00007A3-19-17JAN20
MP3 Operation - AM/FM Radios B
70-2