Operator's Manual

FM and AM Pages (North America)
Use FM and AM Radio pages to listen to radio stations
within range.
Search for a station:
RXA0165038—UN—02NOV18
1. Select desired FM (A) or AM (B) wave band tab.
Selected tab becomes yellow.
2. Select Scan (D) to nd available stations. Scan key
becomes yellow while performing scan. Each station
detected plays for seven seconds before moving to
the next.
3. Select Scan key again when desired station is
located.
Information related to station and what is currently
playing displays on left-hand side of page (C).
KD34109,00007CB-19-22FEB19
FM and AM Pages (Global Including
Europe)
Use FM and AM Radio pages to listen to radio stations
within range.
RXA0165039—UN—02NOV18
Search for a station on the FM (A) and AM (B) wave
band tabs. Enter an exact frequency using Direct Tune
(H) or select from a Station List (G). Information related
to station and what is currently playing displays on left-
hand side of page (C).
Direct Tune
1. Select desired FM (A) or AM (B) wave band tab.
Selected tab becomes yellow.
2. Select Direct Tune (H). A number pad displays to
enter frequency of desired station. Only numbers
from available frequencies are available and display
white.
3. Enter desired frequency.
RXA0165042—UN—05NOV18
4. Select Tune key (K) to bring up entered frequency.
Tune key only becomes available if entered
frequency is available.
To cancel, select Back (L) or X (M).
Station List
1. Select desired FM (A) or AM (B) wave band tab.
Selected tab becomes yellow.
2. Select Station List (G).
3. Select desired tab:
a. All to display a list of all available stations. Go to
step 5.
b. Genres to display a list of available genres. Go
to step 4.
4. Select desired genre.
5. Select desired station.
Other features available on radio page:
Autostore
Autostore (I) is used to set a new group of station
presets when traveling and is primarily used for
European tuners supporting Radio Data System (RDS).
For preset storing procedure, see Presets in this
Operator’s Manual section.
1. Select desired FM (A) or AM (B) wave band tab.
Selected tab becomes yellow.
2. Select Autostore and hold for approximately 2
seconds. Autostore becomes yellow when process
begins.
When Autostore is initiated, radio will search for
strongest stations in selected band. When programming
Radio Operation – Touch Screen Radio
105-1