Operator's Manual

Table Of Contents
Important - Please Read
IMPORTANT: Improper adjustment of factory
settings could severely inhibit radio function.
KD34109,0000025-19-17JAN19
Access Factory Settings
RXA0166083—UN—17JAN19
To access factory settings, press select button (B) two
times while holding down menu button (A).
KD34109,0000027-19-17JAN19
Connection
RXA0166084—UN—18JAN19
Select Connection tab (A) to access connection
information.
OK (B) Displays if connection is present.
NG (C) Displays if connection is not present.
To exit factory settings, select home key (D).
KD34109,0000018-19-06FEB19
Vehicle Signal
RXA0166085—UN—18JAN19
Select Vehicle Signal tab (A) to access connection
information.
To exit factory settings, select home key (B).
KD34109,0000019-19-06FEB19
Audio Check
Verify that speakers are working properly.
RXA0166086—UN—18JAN19
Select Audio Check tab (A) to check speakers.
Speaker output frequency and volume can be adjusted
using the following:
Mode (B) Select to change frequency mode.
Seek Down (C) Select to search for next available
frequency with a lower number.
Seek Up (D) Select to search for next available
frequency with a higher number.
Frequency Adjustment Arrows (E) Select up arrow to
increase or down arrow to decrease frequency in
increments of 0.02.
Intensity Adjustment Arrows (F) Select up arrow to
increase or down arrow to decrease volume in
increments of 1.
Select Speaker Check key (G) to check output. Each
speaker plays static at maximum volume. Select again
to stop check. Text on key changes to indicate current
action.
Factory (Advanced) Settings Touch Screen Radio
155-1