User's Instructions

Aptiv
Mailing Address
2151 East Lincoln Road
Kokomo, Indiana
United States Of America
Phone:
Fax:
Internet:
+01 [phone]
+01 [phone]
www.Aptiv.com
The device under test is manufactured by the grantee (Aptiv Services, LLC), and sold as
an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc…, the grantee must ensure
the end-user has all applicable / appropriate operating instructions. When end-user
instructions are required, as in the case of this product, the grantee must notify the OEM to
notify the end-user.
Aptiv Services, LLC will supply this document to the reseller/distributor dictating what must
be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end-product user’s manual
to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers
must be included in the manual if the device label is not readily accessible to the end
user. The compliance paragraphs below must be included in the user's manual.
******************************************************************************
FCC ID: L2CF3TR IC: 3432A-F3TR
This device complies with Part 15 of the FCC Rules and with ISED Canada license-exempt RSSs.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.