User's Manual

The Wireless Phone Charger is a Confort systems used to provide battery charging capability to commercial compatible Smarthphones.
Phones not equipped with wireless charging receivers can often be supplemented with a shell that makes wireless charging possible.
The Wireless Charger can act as a NFC reader to communicate with a NFC tag.
The general performance of WPC is listed as follow,
Wireless operating frequency：127.7KHz ；Wireless maximum transmitted power：10W
Maximum transmit power value:
127.7kHz：14.385 dBμA/m @10m
NFC operating frequency : 13.56MHz, field strength -12.329 dBμA/m @10m, detection distance<2cm
Connections
The WPC has a single connector that only fits in one position with the Vehicle Harness. This connector powers to the unit by a 12-wire connection and provides as
well communication with the main Systems of the vehicle.
The WPC communicates the charging status and other useful information through the vehicle netwook to be used by other systems.
As this product is powered externally, the Module shall be powered from the an external power supply in compliance with clause 2.5 of the IEC 60950-1 standard
and the operating conditions described in the technical specification of this product.