User's Manual

Rev: 0.1 Date: 23.
Copyright © 2013 Aptos Technology Inc.
5 APPLICATION
5.1 SETTING UP AND RUNNING THE TOOL
This section describes how to use the tool running on the AMWZ5168 module from a
PC. Operational instructions are provided below for those using Microsoft Hyper
Terminal to interface with the tool.
 Open HyperTerminal: Accessories > Communications > HyperTerminal.
 Access the New Connection dialogue box: File > New Connection. Type a name
for the connection, then click OK.
Figure 3.1
 Choose the serial communications port that the board is connected to and then
click OK.