User's Manual

Rev: 0.1 Date:

23.

Figure 2.9

 If the device is based on the FT2232, the second port must also be installed. The

procedure for installing the second port is identical to that for installing the first

port from the first screen of the Found New Hardware Wizard for the USB Serial

Port device. If the driver is Microsoft WHQL certified, this is done automatically.

 Open the Device Manager (located in "Control Panel\System" then select the

"Hardware" tab and click "Device Manger") and select "View > Devices by

Connection", the device appears as a "USB Serial Converter" with an additional

COM port with the label "USB Serial Port" (Figure 2.10). If the device is based on

the FT2232, two ports will be available from a composite USB device.