User's Guide

15 | 27
RFID at your service
1. Turn the battery lock latch 45 degree to the left(Unlock side)and lift the battery cover.
2. Insert the battery into the battery slot, make sure the gold contacts are aligned.
3. Place the cover and turn the lock latch 45 degree to the right ( lock side ).
Before removing the battery, turn off the power. Failure to do so it may cause damage to the
device.
When removing the battery cover, press the cover firmly and slide the latch unlock side, be
careful not to damage your fingernail.
3.2 

3.3 
To charge α711P uses BT cable or a docking cradle with the appropriate power supply. You can also charge
the battery by connecting it to computer with BT cable.
Before using the α711P for the first time, charge the battery until the green
Charging/Notification light emitting diode (LED) remains lit.