amaran 60d S Product Manual English
Introduction Thank you for purchasing the "amaran" series of RGBWW COB lights - amaran 60d S. Amaran 60d S is a 65W full color LED light. It has a new and colorful appearance design and supports full-color output of light sources. Advanced software interaction design, minimalist control method, compatible with Sidus Link® APP control. Amaran 60d S will provide you with lightweight and cost-effective lighting solutions; the newly upgraded exterior color will give you a wonderful visual experience.
19. Please have the product checked by an authorized service personnel agent if the product has a problem. Any malfunctions caused by unauthorized disassembly are not covered by the warranty. The user may pay for maintenance. 20. We recommend only using the original Aputure® cable accessories. Please note that any malfunctions caused by using unauthorized accessories are not covered by the warranty. The user may pay for maintenance. 21.
Components List Please make sure all accessories listed below are completed before using. If not, please contact with your sellers immediately. amaran 60d S Standard Kit： Protective cover (1 pc) Tie Down (1 pc) Cable Tie Hyper reflector (1 pc) Battery case (1 pc) Power Adapter (1 pc) Power cable (1 pc) * Tips: The illustrations in the manual are only diagrams for reference.
Product Details Bowens Mount Release Latch Protective cover Bowens Mount Display COB LED Bowens Mount Mini Reflector Tie Down Seat button Power switch button Adjusting knob DC-in connector 05
Installations 1. Detaching /attaching the Protection Cover Push the handle of the lever in the direction of the arrow shown in the picture, and rotate the cover to pull it out. Reverse rotation will put the protective cover into. 1 2 3 Always remove the protection cover prior to turning on the light. Always re-install the cover when packing it away. 2. Attaching/detaching the Reflector Push the lever handle according to the arrow direction shown in the picture, and rotate the reflector into it.
4. Soft light umbrella installation Insert the soft light handle into the hole, then lock the locking knob. 1 2 *The soft light umbrella sold separately. 5. Battery handle installation Tighten the lamp body and the battery handle via 1/4 screw, then attach the battery plate or V-mount battery to the handle with the V-mount lock. 1 2 3 *The battery sold separately.
6. Power supply Powered by AC AC 100V-240V ~ ~ ~ ~ *Please press the button on the DC interface to remove the power cord from the lamp. Do not pull it out forcibly. *Please press the spring-loaded lock button on the power cord to remove the power cord. Do not pull it out forcibly. Powered by DC 1 2 *Batteries sold separately. Please press the seat button to remove the batteries. Do not pull it out forcibly.
Operations 1.Power ON/OFF Press the power button to turn the light on and off. 2.Manual Control 2.1 Menu 2.1 INT / CCT Rotate the INT adjusting knob to adjust the brightness with 1% variable, and the brightness change range is (0~100) %, and display the change of (0~100) % in real time on the LCD display. Click the INT adjustment knob to quickly switch the brightness level: 20%→40%→60%→80%→100%→20%→40% →60%→80%→100% cycle switch.
2.3 FX Connect Sidus Link® APP, the user can find the Bluetooth serial number corresponding to the lamp in the APP and connect. When controlling the light effect through the APP, "FX" will be displayed on the upper left corner of the screen. In wireless mode, 8 lighting effects can be controlled through APP: Paparazzi / Fireworks / Faulty Bulb / Lightning / TV / Pulsing / Strobe / Explosion. 2.4 BT Settings 1.Long press the Bluetooth reset button to reset Bluetooth. 2.
5. After resetting the light's Bluetooth connection, your mobile phone or tablet will be able to connect to and control the light. 2.5 Update Firmware updates can be updated online via the Sidus Link® app for OTA updates. 3. Using the Sidus Link® APP You can download the Sidus Link® app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit Sidus.link/app/help for more details regarding how to use the app to control your Aputure® lights. Sidus.
Specifications DC Input Power(Max) 77 W Output Power(lamp) 65 W CCT 5600 K CRI 97 TLCI 99 CQS 95 SSI (D56) 86 TM-30 Rf（avg.） 96 TM-30 Rg（avg.） 100 Luminous flux 7195 lm DC : 19 V / 4.73 A Naked: 108° Beam angle Power supply Reflector: 14° Operating temperature -10℃ ~ +40℃ Control Methods Manual, Sidus Link® App Remote control distance(Bluetooth) Cooling method AC : 100 V - 240 V / 1.5 A V-mount battery: 12V - 16.
