amaran PT Product Manual English
Introduction Important Safety Instructions When using this unit, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Please keep amaran PT away from hard drives, credit cards, monitors, mechanical watches, mobile phones, medical devices (pacemakers), etc. 3. Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use. 4.
FCC Compliance Statement WARNING Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PT2c PT2c x 1 Power Adapter x 1 Carrying Bag x1 Magnetic T12 Bracket x 2 3/8”-16 Eyebolt x 1 PT4c PT4c x 1 Carrying Bag x1 Power Adapter x 1 Magnetic T12 Bracket x 2 3/8”-16 Eyebolt x 1 Note: The illustrations in the manual are only diagrams for reference. Due to the continuous development of new versions of the product, if there are any differences between the product and the user manual diagrams , please refer to the product itself.
Product Details 1 Rotatable Magnets (PT1c Only) 2 Battery Cover (PT1c Only) 3 Power Button 5 Control Display Screen 4 6 7 8 9 PT1c Menu/Back Button Up/Down Buttons OK (Enter) Button USB-C Charging/DMX port 3 3/8”-16 Female Threaded Holes 9 4 5 6 7 8 2 1 9 PT2c / PT4c Note: PT2c shown as an example Operations 1. Power ON/OFF Press and hold the power button fo 3 seconds to turn the amaran PT on or off.
2. USB Type-C Charging 100 - 240 V Note: PT1c only supports 5V /2A power adapter or mobile power charging. Note: Charging rate will slow down when the light is powered on. Turn the light off for optimal charging. 3. Manual Control 3.
3.2 Menu Press MENU to access the system menu, press the Up/Down buttons and press the OK button to select the Light Mode / Bluetooth Settings / DMX Settings / System Settings. 3.3 Light Mode 3.3.1 CCT Press the Up/Down buttons and press the OK button to select CCT in Light Mode. INT (Intensity): 0 - 100 % CCT (Correlated Color Temp.): 2700 K - 10000 K G/M (Green / Magenta adjustment): -1.0 ~ ＋1.0 G/M INT CCT CCT 90 3.3.
3.3.3 SYS FX Press the Up/Down buttons and press the OK button to select SYS FX in Light Mode. Press the Up/Down buttons and press the OK button to select one of the 9 available lighting effects. SYS FX Sub-menu control screen layout: Control Parameter Selection Lighting Effect Name STAT INT MODE Battery Level Fireworks 90 % Parameter Value Note: “Fireworks” SYS FX shown as an example. Note: Please refer to pages 16-20 for detailed information of control parameters. 3.3.
3.4 BT Settings Press the Up/Down buttons and press the OK button to select BT Settings in system menu, Press the Up/ Down buttons to select BT Status / BT Reset / BT UID. BT Status : Turn on/off Bluetooth. BT Reset : Reset the amaran PT Bluetooth connection, and your mobile phone or tablet will be able to connect to and control the light with Sidus Link App. BT UID : Display the Bluetooth Unique Identifier. BT Status Enable BT Reset Disable BT UID 85350f 3.
Note: The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence. Note: If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before. DMX Profiles 1: CCT&RGB 8-bit 2: CCT 8-bit 3: CCT&HSI 8-bit DMX Address 001 DMX Loss Be Hold Last Setting Black Out Fade to Black 3.
Screensaver 30s 60s 120s Product Info: Press the Up / Down buttons and press the OK button to select Product Info to see the Firmware Version. Product Info Firmware 0 Power Mode : Press the Up/Down buttons and press the OK button to select a Power Mode. Power mode With battery No battery With battery: Optimize battery life by prioritizing power supply when equipped with batteries.
Factory Settings: Light Mode: Intensity 50%, CCT 5600K, GM 0 BT Status: ON DMX: Address 001, Profile CCT&RGB, Hold Last Setting. System setting: Language English, screensaver off. 4. Wired DMX Control 4.1 Connect a standard DMX controller Connecting DMX to the first PT fixture OUTPUT 5 5 4 1 2 DMX512 2 4 3 3 1 4 5 3 2 1 DMX512 Daisy chaining multiple lights using DMX * USB-C to DMX Adapter with USB-C Input sold separately. 4.
4.4 Controlling Device Via DMX The amaran PT offers a variety of DMX modes. Please find a detailed overview of all DMX modes in the document, DMX Chart is available for free download on the Aputure official website https://www.aputure.com. 5. Using the Sidus Link APP You can download the Sidus Link app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit Sidus.link/app/help for more details regarding how to use the app to control your Aputure lights.
Specifications Maximum Power Draw PT1C: 8W PT2C: 16W PT4C: 32W PT1C: 6W PT2C: 11.5W PT4C: 23W Maximum Power Output 2,700 - 10,000K CCT Range CRI (@5600K) 95 TLCI (@5600K) 98 CQS (@5600K) 96 SSI (Tungsten) 85 SSI (D56) 75 TM-30 Rf (@5600K) 92 TM-30 Rg (@5600K) 100 PT1C: 4 PT2C: 8 PT4C: 16 Pixel Mapping 180 Beam Angle Chargning Input USB Type-C Battery Voltage 3.7V (PT1c), 14.8V (PT2c/PT4c) Battery Capacity PT1C: 2600mAh / 9.6Wh PT2C: 2600mAh / 38.
Operating Temperature -10 C ~ 40 C / 14 F ~ 104 F Control Methods On-board, Sidus Link App, DMX via USB Type-C Firmware Upgrade Method Sidus Link < _ 80m / < _ 262.5ft Wireless Operating Range (Bluetooth) Screen Type TFT IP Rating IP20 Passive Cooling Cooling Method PT1C: Φ42 x 300 mm / Φ1.6 x 11.8 in PT2C: Φ42 x 600 mm / Φ1.6 x 23.6 in PT4C: Φ42 x 1200 mm/ Φ1.6 x 47.2 in Dimensions PT1C: 351 g / 0.77 lbs PT2C: 705 g / 1.55 lbs PT4C: 1375 g / 3.
PT2c CCT 0.5 m 1m 2700K 586 lux 180 lux 3200K 595 lux 181 lux 4300K 613 lux 185 lux 5600K 647 lux 195 lux 6500K 643 lux 194 lux 7500K 612 lux 185 lux 10000K 563 lux 83 lux CCT 0.5 m 1m 2700K 867 lux 303lux 3200K 868 lux 306 lux 4300K 897 lux 316 lux 5600K 956 lux 332 lux 6500K 955 lux 330 lux 7500K 902 lux 322 lux 10000K 842 lux 297 lux PT4c * This is an averaged result. The luminance of your individual unit may vary slightly from this data.
Detailed Parameters of FX Control System FX Paparazzi Lightning INT 0% - 100% CCT 2700K - 10000K G/M -1.0 - 1.0 FRQ 1 - 10, Random Status Stop / Loop INT 0% - 100% CCT 2700K - 10000K G/M -1.0 - 1.
0% - 100% INT CCT Faulty Bulb 1 - 10, Random CCT 2700K - 10000K G/M -1.0 - +1.0 FRQ 1 - 10, Random HUE 0°- 359° SAT 0% - 100% Mode HSI Status Stop / Loop INT 0% - 100% CCT Pulsing FRQ FRQ 1 - 10, Random CCT 2700K - 10000K G/M -1.0 - +1.
0% - 100% INT CCT Mode HUE Firework CCT+HUE FRQ 1 - 10, Random Status Stop / Loop Pixel FX Color Fade Color Cycle INT 0% -100 % Color No 2/ 3/ 4 Color 1 Color 2 Color 3 Color 4 HUE: 30° /60°/90°/120°/150°/180°/210°/240°/ 270°/300°/330°/360° CCT: 2500K/3200K/4300K/5600K/6500K/7500K Speed 1 - 640 cm/s Move Left / Right Status Play/ Pause / Stop INT 0% - 100% Color No 2/3/4 Color 1 Color 2 Color 3 Color 4 HUE: 30° /60°/90°/120°/150°/180°/210°/240°/ 270°/300°/330°/360° CCT: 2500K/320
Pixel INT 0%- 100% Bkgd INT 0%- 100% Pixel Size S/M/L Departure 1 Way/ 2 Way One Pixel Chase Pixel 1 Blackground Two Pixel Chase Three Pixel Chase HUE: 30° /60°/90°/120°/150°/180°/210°/240°/ 270°/300°/330°/360° CCT: 2500K/3200K/4300K/5600K/6500K/7500K Speed 1 - 640 cm/s Move Left/ Loop/ Right Status Play/ Pause/ Stop Pixel INT 0%- 100% Bkgd INT 0%- 100% Pixel Size S/M/L Departure 1 Way/2 Way Pixel 1 Pixel 2 Blackground HUE: 30° /60°/90°/120°/150°/180°/210°/240°/ 270°/300°/330°/360
INT 0%- 100% Speed 1 - 640 cm/s Move Left/ Right Status Play / Pause / Stop Dim Range [0%-65%]-[25%- 100%] Bkgd INT 0%- 100% Rainbow Color Blackground Pixel Fire HUE: 30° /60°/90°/120°/150°/180°/210°/240°/ 270°/300°/330°/360° CCT: 2500K/3200K/4300K/5600K/6500K/7500K Frequency 0.
