ai15858101745_LS_300x Product_Manual_EN.
ai15858101745_LS_300x Product_Manual_EN.pdf 2 2020/4/2 下午2:49 Foreword Thank you for purchasing Aputure “Light Storm” LS 300x. The Aputure LS 300x is a Bi-color Point Source LED Light Fixture. We've taken all of your favorite features of the daylight-balanced 300d II and added Expanded Bi-color CCT control, making it the first Bowens Mount Bi-color LED that can be used with optical modifiers properly.
ai15858101745_LS_300x Product_Manual_EN.pdf 3 2020/4/2 下午2:49 8. Let the lighting fixture cool completely before storing. 9. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids. 10. To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact cs@aputure.com or take it to qualified service personnel when service or repair work is required. Incorrect reassembly may cause electric shock when the lighting fixture is in use. 11.
ai15858101745_LS_300x Product_Manual_EN.pdf 4 2020/4/2 下午2:49 21. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis. 22. The instructions and information in this manual are based on thorough, controlled company testing procedures.
ai15858101745_LS_300x Product_Manual_EN.pdf 5 2020/4/2 下午2:49 Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit than the receiver is connected to. Consult the dealer or an experienced radio/TV technician for help. RF Warning Statement: This device has been evaluated to meet general RF exposure requirements. Check list When you unbox the product, please make sure all the items listed below are included.
ai15858101745_LS_300x Product_Manual_EN.pdf 6 2020/4/2 下午2:49 Product Details 1. Light Bowens Mount Release Latch Bowens Mount Label Made in China UID LED Light Source Optical Blending Prism 55° Hyper-Reflector 5-Pin Male XLR Receiver Yoke Cable Relief Hook Ratcheting Disk Brake Handle T-Handle / Baby Pin Mounting Screw Baby Pin Receiver/Mounting Column (5/8in. / 16mm) 2.
ai15858101745_LS_300x Product_Manual_EN.pdf 7 2020/4/2 下午2:49 PUSH PUSH 5-Pin Female XLR Power Output DMX IN Port 3. VA-Remote RC1+ Neutrik® powerCON Power Input DMX OUT Port Channel Indicators Group A Dimming Controls Group A On/Off Group B Dimming Controls Group B On/Off Group C Dimming Controls Group C On/Off Group C Frequency & CCT Controls FX Button Group D Dimming Controls Group D On/Off Group D Frequency & CCT Controls Channel Selector CR2302 Battery Compartment Installations 1.
ai15858101745_LS_300x Product_Manual_EN.pdf 8 2020/4/2 下午2:49 2. Attaching/detaching the protection cover Pull back the retaining pin, rotate the cover clockwise, then detach the cover. To reattach the cover, insert it into the Bowens mount and rotate counterclockwise. Notice: Always remove the protection cover prior to turning on the light. Always re-install the cover when packing it away. 3.
ai15858101745_LS_300x Product_Manual_EN.pdf 9 2020/4/2 下午2:49 5. Instructions for the Quick-Release "Lightning Clamp" 1) Clamp the Lightning Clamp onto a light stand. 2) To attach the control box, rotate the release lever to unlock the quick-release baseplate, then mount the control box onto the Lightning Clamp (the release lever will automatically spring back). 3) To remove the control box, grasp it firmly, then unlock the quick-release plate by turning the release lever, and detach the control box.
ai15858101745_LS_300x Product_Manual_EN.pdf 10 2020/4/2 下午2:49 7. Powering up the controller 1) Powering by AC Neutrik® powerCON Male Connector PUSH AC 100V-240V 1 2 ~ ~ Neutrik® powerCON Female Locking Connector To disconnect the Neutrik® powerCon cable, pull back on the yellow release tab on the cable connector, and rotate the connector counterclockwise. 2) Powering by Batteries V-Mount Battery Anton Bauer Battery * Batteries: Voltage 12~16.8V; Recommended ≥15A continuous discharge.
ai15858101745_LS_300x Product_Manual_EN.pdf 11 2020/4/2 下午2:49 8. Insert the button battery to power VA-Remote RC1+ Remove battery compartment Install button battery and insert it into the VA-Remote RC1+ Operations 1. Press the power button to turn the light on and off Brightness Battery Level/ AC Power Symbol Wireless Control Mode Remaining Operating Time Dimming Curve CCT Groups Channels * Default: Channel 1 , Group A 2.
ai15858101745_LS_300x Product_Manual_EN.pdf 12 2020/4/2 下午2:49 2) Rotate the CCT Control Wheel to adjust the color temperature of the light from 2700K-6500K. - + 3) Lighting FX Mode Press and hold the Effects button for 2 seconds to activate Lighting FX mode, then short press the Effects button to toggle between Paparazzi, Fireworks, Faulty Bulb, Lightning, TV, Pulsing, Strobe, Explosion, Fire, etc. a. Paparazzi Effect b. Fireworks Effect* c. Faulty Bulb Effect d.
ai15858101745_LS_300x Product_Manual_EN.pdf 13 2020/4/2 下午2:49 e. TV Effect* f. Pulsing Effect g. Strobe Effect h. Explosion Effect** i. Fire Effect*** * As of writing this the TV effect worked in CCT range presets and you cannot set a fixed base CCT. ** When controlling the explosion effect, short press the Trigger button to single trigger the lighting effect. ***As of writing this the Fire effect worked in CCT range presets and you cannot set a fixed base CCT.
ai15858101745_LS_300x Product_Manual_EN.pdf 14 2020/4/2 下午2:49 When in Lighting FX mode, short press the "Frequency" button to enter Frequency Adjustment Mode. Then rotate the Brightness Control Wheel to adjust the frequency of the effect from 1 to 10 and R (Random) as displayed on the screen. When in Lighting FX mode, rotate the CCT Control Wheel to adjust the base CCT of the lighting effect from 2700K to 6500K as displayed on the screen.
ai15858101745_LS_300x Product_Manual_EN.pdf 15 2020/4/2 下午2:49 5) Press the MENU button to enter the system menu interface, as shown below. 6) DMX mode Press the MENU button to enter the system menu, rotate the dimming wheel to select DMX mode and press the MENU button again to enter DMX mode. When in DMX mode, rotate the brightness control wheels to set the device's DMX channel. Then press the MENU button to take you back to the Menu interface.
ai15858101745_LS_300x Product_Manual_EN.pdf 16 2020/4/2 下午2:49 8) Fan mode Press the MENU button to enter the system menu, rotate the dimming wheel to select Fan Mode, and press the MENU button again to enter Fan Mode. Use the wheel to select between Force* and Auto, then press the MENU button to confirm your selection. * In "Force Mode" the fan will continuously spin at its maximum speed. In "Auto Mode" the fan will only begin spinning when the light has reached 45°C.
ai15858101745_LS_300x Product_Manual_EN.pdf 17 2020/4/2 下午2:49 11) Language Press the MENU button to enter the system menu, rotate the dimming wheel to select Language, and press the MENU button again to enter the Language menu*. Use the wheel to select from the available languages. Initial languages include "English" and "Chinese". * The factory default language is English. 12) USB Mode (1) The control box has a built-in USB port for firmware updates (for both the control box and lamp head).
ai15858101745_LS_300x Product_Manual_EN.pdf 18 2020/4/2 下午2:49 3. Remote Control You can control the LS 300x from any channel or group configuration. * Light Storm lights have three channels (1/2/3) and four groups (A/B/C/D). * Only groups "C" or "D" can be used to control brightness, CCT and lighting e ects, while groups "A" and "B" can only be used to control brightness. 1) Configuring channel and group settings on the control box Press the CHANNEL button to toggle between channels 1, 2, & 3.
ai15858101745_LS_300x Product_Manual_EN.pdf 19 2020/4/2 下午2:49 3) Adjusting brightness Press A/B/C/D to toggle the lights on or off, press ( the light from 0 to 100% accordingly. / ) to adjust the brightness of * This remote will not work when the light is in DMX mode. ** The remote control will only control the operation of the light when the fixture is in 2.4Ghz Wireless Control Mode.
ai15858101745_LS_300x Product_Manual_EN.pdf 20 2020/4/2 下午2:49 5) FX Control Press the ( + / ) button to enter or exit lighting effect mode. Press the ( + / ) to toggle between different effects. Press the ( / ) buttons to adjust the output of the light. Press the ( / ) buttons to toggle the effect frequency. Enter or Exit Effect Mode a. Paparazzi Mode b. Fireworks Mode c. Faulty bulb Mode d. Lightning Mode e. TV Mode f. Pulsing Mode g. Strobe Mode h. Explosion Mode i.
ai15858101745_LS_300x Product_Manual_EN.
ai15858101745_LS_300x Product_Manual_EN.
ai15858101745_LS_300x Product_Manual_EN.
ai15858101745_LS_300x Product_Manual_EN.pdf 24 2020/4/2 下午2:49 Specifications Operating Current 3.5A Power Consumption 350W maximum Power Supply AC 100～240V 50/60Hz Cooling Mode Active Cooling TLCI ≥96 CQS ≥95 CRI ≥96 Color Temperature 2700K~6500K Radio Frequency 2.4GHz Channels 1/2/3 Groups A/B/C/D Remote Ability ≤100m Battery requirement 12V-16.8V 15A APP Control Type Bluetooth Light Sizes (L*W*H) 29.84*21.56*34.45cm / 11.75*8.49*13.56in Controller box 27.86*12.67*8.
ai15858101745_LS_300x Product_Manual_EN.
ai15858101745_LS_300x Product_Manual_EN.pdf 26 2020/4/2 下午2:49 Serial No. Item Name Purchase Date Buyer Name Buyer Phone Buyer Add Franchiser Seal Aputure Imaging Industries Co.,Ltd. Inspection: Qualified Add: F/3, Building 21, Longjun Industrial Estate, Heping West Road, Shenzhen, Guangdong Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser from defects in material and workmanship for a period of one (1) year after the date of purchase. For more details of warranty visit www.
