Product Manual

-8-

Sizes (L*W*H)

4. Instructions for the Quick-Release "Lightning Clamp"

* Hang the cable from the head cable relief hook

to manage and reduce tension on the cable.

* Disconnect the XLR head cable by pushing down on the locking tabs on the female XLR connectors,

then remove the cable.

5. Connect the Lamp Head to the control box

XLR Locking Tab

XLR Locking SlotXLR Locking Slot

XLR Locking Tab

Weight

* The Quick-Release "Lightning Clamp" can clamp onto square or round pipe with a

diameter between 2-5cm or 0.79-1.97in.

670g / 1.48lbs 10.35x8.74x12.5cm / 4.07x3.44x4.92in

Speciﬁcations

PUSH

1) Clamp the Lightning Clamp onto a light stand.

2) To attach the control box, rotate the release lever to unlock the quick-release

baseplate, then mount the control box onto the Lightning Clamp (the release

lever will automatically spring back).

3) To remove the control box, grasp it ﬁrmly, then unlock the quick-release plate by

turning the release lever, and detach the control box.

Connect the Lamp Head to the control box using the 5-Pin Male-to-Female XLR Head

Cable.