User's Manual

-13-
* If the light is powered off, upon turning on again, the light resumes its last saved setting.
* Through the menu interface, select "Device serial number" to view the serial number of the device.
Rotate the MENU key to select "INT, frequency", and then rotate the "OK" knob to
adjust the brightness value (10% ~ 100%), and frequency [1-10, R (random)].
Users can connect devices with the name LS 60d ****** through the bluetooth of
their mobile phones or tablets (six digits + letters are the serial number of the
machine). At this time, they can control the devices wirelessly through their mobile
phones or tablets.
6) Dimming curve mode
5) Wireless mode
* In explosion mode, short press the Trigger
button to single trigger the light effect.
* The adjustable frequency of explosion mode
is 1~10.
g. Strobe Mode h. Explosion Mode
* In FX mode, click "MENU" to return to the light effects MENU interface. At this point, rotate "OK" to
switch to different light effects. Click "MENU" again to return to the main MENU interface.
At this time, the selected FX mode is still maintained. You can choose different options according
to your needs, and select "CCT" to exit FX mode.
Press “MENU” key to enter MENU mode, rotate “MENU” key to select "Dimming curve"
item, click “MENU” key to enter "Dimming curve" mode, rotate "OK" key to select
exponential, logarithmic, linear and "S" dimming curve, and then click "OK" key to
confirm the selection.