User Manual


III. Toaster Placement
A. Locate the toaster near a grounded receptacle of the proper configuration (see below). Plug the
CORDSETDIRECTLYINTORECEPTACLE$/./453%!.%84%.3)/.#/2$
 )NTHE5NITED3TATES.%-!2
 )N#ANADA.%-!2
B. Place the toaster on a flat surface providing the following minimum clearances:
1. Base = one inch (provided with legs installed).
2. Side and back walls = two inch
3. Overhead = Enough space to allow adequate heat displacement.
4. WARNING:&AILURETOPROVIDETHESECLEARANCESWILLCAUSEUNITFAILUREANDINVALIDATEWARRANTY
claims.
#0OSITIONTOASTERWHERECUSTOMERSWILLNOTCONTACTANYSURFACELABELED#!54)/.(/4
NOTE: do not operate the toaster with the legs removed.
SPECIFICATIONS
DIMENSIONS – AT EXPRESS