User Manual

OPERATION INSTRUCTIONS

I. Preparation

A. Clean toaster thoroughly before ﬁrst use (See cleaning instructions).

"#ONTROLS&AMILIARITY

 4OP(EAT3WITCH/PERATESTOPELEMENTSANDCONVEYOR

 "OTTOM(EAT3WITCH/PERATESBOTTOMELEMENTANDCONVEYOR

#7ARMUPTIME!LLOWlVEMINUTES

II. Normal Use

A. Loading Product

 0LACEPRODUCTON7IRE&EEDER4HECONVEYORWILLAUTOMATICALLYDRAWPRODUCTTHROUGHTHE

toaster at a speed determined by conveyor speed control.

B. Toasting Darkness: determined by conveyor speed.

1. Darkest toasting - set conveyor speed control to one (1).

2. Lightest toasting - set conveyor speed control to ten (10).

3. Other factors affecting toasting darkness.

a) Product moistness - moister product requires slower speeds

b) Sugar content in product - product with more sugar requires slower speeds

c) Product Temperature - cooler product requires slower speeds

 &ORBESTRESULTSUSEDAYOLDBREADSTOREDROOMTEMPERATURE

CLEANING INSTRUCTIONS

I. Daily Cleaning

A. With toaster off and cool, turn toaster on and set conveyor speed to four.

B. Using a plastic abrasive pad, wipe the conveyor belt in a back and forth motion (side-to-side)

motion to remove baked-on product. Wipe the conveyor belt in the same manner with a hot,

damp cloth.

C. Turn off toaster.

D. Slide the reﬂector/crumb tray out of toaster by pulling forward. Dispose of crumbs and wash

tray in hot, soapy water. Dry tray and place back in toaster.

E. Remove toast drawer from toaster by sliding out and lifting up. Dispose of crumbs and wash

drawer in hot, soapy water. Wipe crumbs from inside the toaster with a hot, damp cloth. Dry

drawer and place back in toaster.

& 7IPETHEEXTERIORSURFACESOFTHETOASTERWITHAHOTDAMPCLOTH

II. Periodic Cleaning

A. Conveyor Belt

1. Remove conveyor belt from toaster.

2. Use pliers to bend a link to the inside until the hook clears the link above.

3. Repeat on other side.

4. Pull the loosened links together and slide through center of belt link.

 #LEANBELTTHOROUGHLY3EEITEMUNDERhDAILYCLEANINGv

6. Install conveyor belt by reversing order of steps noted above (See item 1).

"#OOLING)NTAKE&AN

1. Unplug and lay toaster on side.

2. Brush dirt and debris from fan opening and guard.

3. WARNING: Neglecting to keep fan opening clean could result in toaster failure.