Operating instructions

3
WARNING: Install per the spacing requirements listed in the installation section of this
manual. We strongly recommend having a competent professional install the
equipment. A licensed electrician should make the electrical connections and connect
power to the unit. Local codes should always be used when connecting these units to
electrical power. In the absence of local codes, use the latest version of the National
Electrical Code.
WARNING: This device should be safely and adequately grounded in accordance
with local codes, or in the absence of local codes, with the National Electrical code,
ANSI/NFPA 70, Latest Edition to protect the user from electrical shock. It requires a
grounded system and a dedicated circuit, protected by a fuse or circuit breaker of
proper size and rating. Canadian installation must comply with the Canadian Electrical
Code, CSAC22.2, as applicable.
CAUTION: Do not set the fryer with its back flat against the wall. It will not operate
properly unless there is at least 3" breathing space behind fryer.
WARNING: A factory authorized agent should handle all maintenance and repair.
Before doing any maintenance or repair, contact APW Wyott.
WARNING: Never clean any electrical unit by immersing it in water. Turn off before
cleaning surface.
WARNING: An earthing cable must connect the appliance to all other units in the
complete installation and from there to an independent earth connection.
NOTICE: The unit when installed must be electrically grounded and comply with local
codes, or in the absence of local codes, with the national electrical code
ANSI/NFPA70- latest edition. Canadian installation must comply with
CSA-STANDARD C.22.2 Number 0 M1982 General Requirements-Canadian
Electrical Code Part II, 109-M1981- Commercial Cooking Appliances.
WARNING: SHOCK HAZARD - De-energize all power to equipment before cleaning
the equipment.
NOTICE: This product is intended for commercial use only. Not for household use.
NOTICE: Local codes regarding installation vary greatly from one area to another.
The National Fire Protection Association, Inc. states in its NFPA96 latest edition that
local codes are “Authority Having Jurisdiction” when it comes to requirement for
installation of equipment. Therefore, installation should comply with all local codes.
CAUTION: This product when stacked has more than one power supply connection
point. Disconnect all power supplies before servicing.
CAUTION: Suitable for installation on combustible floor when installed with legs or
casters provided.