Operating instructions

CAPACITIES MODEL EGD48GB MODEL EGD72GB BOTH MODELS
CAPACITIES QTY/ APPROX QTY/ APPROX COOKING TIME &
LOAD PROD/HR LOAD PROD/HR TEMPERATURE
MEATS
Hamburgers 2.5oz 3.5”dia 65 945+ 86 1300+ 3 min. @ 350ºF
Minute steak 4 oz 1/2”th 24 360+ 32 400+ 4 min. @ 350ºF
Beef Tenderloin 5 oz 1”th 48 280+ 64 370+ 8 min. @ 360ºF
Liver 3 oz. 3/8” th. 36 450+ 48 600+ 3-4 min. @ 350ºF
Bacon 22 to 32 slices/lb 3.5lbs 30lbs 4.67lbs 40lbs 5-6 min. @ 350ºF
Pork Link Sausages
fresh 1.25 oz 3.5” long 12lbs 70lbs 16lbs 93lbs 10 min. @ 325ºF
Hot Dogs split 64 900+ 86 1200+ 3 min. @ 350ºF
Ham Steak 1lb 1/2” th 24 325+ 32 433+ 4 min. @ 350ºF
OTHER FOODS
Eggs, Fried 64 900+ 86 1200+ 3 min. @ 300ºF
Pancakes 4” diameter 40 450+ 53 600+ 3-4 min. @ 375ºF
Fried Potatoes blanched
Servings 51 750+ 68 1000+ 3 min. @ 375ºF
Fried Onions blanched
Servings 76 1100+ 103 1470+ 3 min. @ 340ºF
Hamburger Buns 3.5” dia. 32 600+ 43 852+ 2 min. @ 350ºF
TROUBLE SHOOTING GUIDE
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Unit Fails to
Operate
Temperature
Too Low
Temperature
Too High
No Power
Loose Connection
Open Circuit Breaker
or Fuse
Faulty Thermostat
Draft on Product
Set Point too Low
Thermostat Calibration
Incorrect
Heating Element
not Working
Faulty Thermostat
Set Point too High
Thermostat Calibration
Incorrect
Faulty Thermostat
Make sure the thermostat is set to a temperature and not turned
off.
Make sure the unit is connected to a live power source.
Place all of the thermostats in the “OFF” position and disconnect
power from the unit. WARNING: Failure to do so may result in
electrical shock. Check and tighten all connections.
Reset breaker or replace fuse.
Place all of the thermostats in the “OFF” position and disconnect
power from the unit. WARNING: Failure to do so may result in
electrical shock.
Replace thermostat.
Remove draft
Adjust the thermostat to the temperature desired.
Calibrate the thermostat using the procedure in this manual.
Place all of the thermostats in the “OFF” position and disconnect
power from the unit. WARNING: Failure to do so may result in
electrical shock. Replace heating element.
Place all of the thermostats in the “OFF” position and disconnect
power from the unit. WARNING: Failure to do so may result in
electrical shock. Replace thermostat.
Adjust the thermostat to the temperature desired.
Calibrate the thermostat using the procedure in this manual.
Place all of the thermostats in the “OFF” position and disconnect
power from the unit. WARNING: Failure to do so may result in
electrical shock. Replace thermostat.
COOKING CHART
9