Operating instructions

ManualsBrandsAPW Wyott ManualsFood WarmerFDB-30

INSTALLATION

AND

OPERATING

INSTRUCTIONS

INTENDED FOR OTHER THAN HOUSEHOLD USE

Models: FDB, FDDB, FDLB & FDDLB

RETAIN THIS MANUAL FOR FUTURE REFERENCE

UNIT MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES

OVERHEAD FOODWARMERS

APW WYOTT

This equipment has been engineered to provide you with year-round dependable service when used

according to the instructions in this manual and standard commercial kitchen practices.

Initial heating of unit may generate smoke or fumes and must be done in a well ventilated area.

Overexposure to smoke or fumes may cause nausea or dizziness.

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.

WARNING: Improper installation, adjustment, alteration, service or maintenance can

cause property damage, injury or death. Read the Installation, Operating and

Maintenance Instructions thoroughly before installing or servicing this equipment.

Summary of content (16 pages)

PAGE 1
R INSTALLATION AND OPERATING INSTRUCTIONS Models: FDB, FDDB, FDLB & FDDLB OVERHEAD FOODWARMERS INTENDED FOR OTHER THAN HOUSEHOLD USE RETAIN THIS MANUAL FOR FUTURE REFERENCE UNIT MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES ! FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ! ! WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death.
PAGE 2
TABLE OF CONTENTS SECTION ITEM PAGE 1 General Information 2 2 Electrical Requirements 2 3 Electrical Specifications 3 4 Overall Dimensions 4 5 Installation 5 6 Operation 5 7 Cleaning 5 8 Troubleshooting 5 9 Wiring Diagrams A. FDB-120V B. FDC-208/240 C. FDLB-120V D. FDLB-208/240V E. FDLB-120V w/Fuse F. FDDB-120V G. FDDB-208/240V H. FDDLB-120V I. FDDLB-208/240V J. FDDLB-208/240 w/Fuse 6 6 6 7 7 8 8 9 9 10 10 10 Parts List & Exploded View 11 11 Warranty 14 1.
PAGE 3
. ELECTRICAL SPECIFICATIONS STANDARD BLACK RADIANT OVERHEADS THERMOSTAT AND ROCKER SWITCH CONTROL MODEL FDB-18 FDLB-18 FDDB-18 FDDLB-18 FDB-24 FDLB-24 FDDB-24 FDDLB-24 FDB-30 FDLB-30 FDDB-30 FDDLB-30 FDB-36 FDLB-36 FDDB-36 FDDLB-36 FDB-42 FDLB-42 FDDB-42 FDDLB-42 FDB-48 FDLB-48 FDDB-48 FDDLB-48 FDB-54 FDLB-54 FDDB-54 FDDLB-54 FDB-60 FDLB-60 FDDB-60 FDDLB-60 FDB-66 FDLB-66 FDDB-66 FDDLB-66 FDB-72 FDLB-72 FDDB-72 FDDLB-72 VOLTS - RATINGS WATTS CIR-1 120 208 120/208 240 120/240 400 480 800 880 575 65
PAGE 4
! ! NOTE: TO AVOID BURNING OR CHARRING OF MATERIALS IN THE SURFACE BELOW THE FOODWARMER USE ONLY ABOVE AN ALL-METAL STRUCTURE SUCH AS ATABLE OR COUNTERTOP. SEE MINIMUM CLEARANCE CHARTABOVE. REMOTE SWITCHES ARE RECOMMENDED FOR UNDER SHELF MOUNTING. LONGER SWITCH LIFE WILL RESULT FROM COOLER SWITCH MOUNTING LOCATIONS. WARNING: ELECTRICAL SHOCK HAZARD. FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL COULD RESULT IN SERIOUS INJURY OR DEATH. ! ! Electrical Ground is required on this appliance.
PAGE 5
. INSTALLATION A. B. C. D. E. F. G. Always clean equipment thoroughly before first use (See cleaning instructions). Provide the following clearances around foodwarmer: 1. Single model minimum distance to non-combustible surface below = 4 to 10. Dual model minimum distance to non-combustible surface below = 8 to 14. For combustible surface, install the single and dual not closer than 13-1/2 to surface below. 2. Minimum distance to side (end) walls = 2. 3. Minimum distance to back walls = 2. 4.
PAGE 6
9. WIRING DIAGRAMS A. FDB-120V WIRING DIAGRAM FRONT-SW F-T'STAT ELEMENT 5 A-L1 7 A-LN 4 1 4 5 3 6 3 2 GRN FDB-120V WIRE # 6 TO BE 10 GA. - 450°C. WIRE # 1 TO BE 12 GA. - 100°C. ALL OTHER WIRES TO BE 12 GA. - 200 OR 250°C. L1 6 1 2 LN FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN. LEADS TO BE 6" FROM HOUSING FDB-208/240V WIRING DIAGRAM FRONT-SW F-T'STAT ELEMENT 6 5 A-L1 7 A-L2 1 GRN FDC-208/240V WIRE # 6 TO BE 10 GA. - 450°C. WIRE # 1 TO BE 12 GA. - 100°C.
PAGE 7
C. FDLB-120V WIRING DIAGRAM FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN. LEADS TO BE 6" FROM HOUSING LIGHT-SW TWO LAMPHOLDERS THREE LAMPHOLDERS 60,66,72 MODELS 36,42,48,54 MODELS 10 10 10 10 9 ELEMENT 5 5 3 6 A-L1 7 A-LN 8 FRONT-SW 4 1 4 2 5 3 6 1 2 L1 7 3 FDLB-208/240V WIRING DIAGRAM FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN.
PAGE 8
FDLB-120V w/FUSE WIRING DIAGRAM E. FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN. LEADS TO BE 6" FROM HOUSING LIGHT-SW TWO LAMPHOLDERS THREE LAMPHOLDERS 60,66,72 MODELS 36,42,48,54 MODELS 10 10 9 ELEMENT 5 13 A-L1 7 A-LN 8 FRONT-SW 4 FDLB-120V W/FUSE WIRE #'S 6 TO BE 10 GA. - 450°C. WIRE # 1 TO BE 12 GA. - 100°C. ALL OTHER WIRES TO BE 12 GA. - 250°C. FUSE 1 4 2 5 3 6 11 3 1 2 7 3 FDDB-120V WIRING DIAGRAM FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN.
PAGE 9
G. FDDB-208/240V WIRING DIAGRAM FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN. LEADS TO BE 6" FROM HOUSING B-T'STAT ELEMENT 11 BACK-SW 10 B-L1 1 4 2 5 3 6 13 B-L2 F-T'STAT A-L1 7 A-L2 4 1 2 L1 6 5 GRN ELEMENT FRONT-SW 8 FDDB-208/240V WIRE #'S 6 AND 12 TO BE 10 GA. - 450°C. WIRE # 1 TO BE 12 GA. - 100°C. ALL OTHER WIRES TO BE 12 GA. - 250°C. 1 4 2 5 3 6 FDDLB-120V WIRING DIAGRAM FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN.
PAGE 10
I. FDDLB-208/240V WIRING DIAGRAM FOR REMOTE MODELS LABEL LEAD WIRES AS SHOWN. LEADS TO BE 6" FROM HOUSING LIGHT-SW TWO LAMPHOLDERS THREE LAMPHOLDERS 60,66,72 MODELS 36,42,48,54 MODELS 17 17 15 C-L1 17 17 16 C-LN ELEMENT 11 B-T'STAT 14 10 B-L1 4 5 3 6 1 4 2 5 3 6 13 B-L2 ELEMENT 6 5 A-L1 7 A-L2 8 FRONT-SW 4 1 GRN FDDLB-208/240V WIRE #'S 6 AND 12 TO BE 10 GA. - 450°C. WIRE # 1 TO BE 12 GA. - 100°C. ALL OTHER WIRES TO BE 12 GA. - 250°C.
PAGE 11
10.
PAGE 12
FDB / FDLB / FDDB / FDDLB-18 to 72 PARTS LIST ITEM P/N 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 3 3 3 3 3 3 3 3 3 4 5 6 7 8 9 9 10 11 70476835 70476836 70476837 70476838 70476839 70476840 70476841 70476842 70476843 70476844 70476845 70476846 70476847 70476848 70476849 70476850 70476851 70476852 70476853 70476854 70476855 70476856 70476857 70476858 70476859 70476860 70476861 70476862 70476863 70476864 70402028 76211 76212 76213 76214 76215 76216 76217 76218 76219 76220 75917 75916 4
PAGE 13
FDB / FDLB / FDDB / FDDLB-18 to 72 PARTS LIST (Continued) ITEM P/N 20 20 20 20 20 20 21 22 22 22 22 22 22 22 22 22 22 23 23 24 24 24 24 25 26 27 75842 75826 75827 75843 75811 75812 58004 70400433 70400434 70400435 70400436 70400437 70400438 70400439 70400440 70400441 70400442 70476314 70476316 70421275 70401275 70411275 70412275 70444900 70400005 70400006 DESCRIPTION QUAN ELEMENT, 1800W - 120V ELEMENT, 1800W - 208V ELEMENT, 1800W - 240V ELEMENT, 1980W - 120V ELEMENT, 1980W - 208V ELEMENT, 1980W - 240V
PAGE 14
11. APW WYOTT EQUIPMENT LIMITED WARRANTY APW Wyott Foodservice Equipment Company warrants it's equipment against defects in materials and workmanship, subject to the following conditions: This warranty applies to the original owner only and is not assignable. Should any product fail to function in its intended manner under normal use within the limits defined in this warranty, at the option of APW Wyott such product will be repaired or replaced by APW Wyott or its Authorized Service Agency.
PAGE 15
IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment. For Warranty Service and/or Parts, this information is required.
PAGE 16
Phone: +1 (214) 421-7366 Fax: +1 (214) 565-0976 Toll Free: +1 (800) 527-2100 APW WYOTT Website: www.apwwyott.com 729 Third Avenue E-mail: Dallas, TX 75226 info@apwwyott.