R INSTALLATION AND OPERATING INSTRUCTIONS CREAM DISPENSERS Models: DAO & DBO RETAIN THIS MANUAL FOR FUTURE REFERENCE ! ! WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the Installation, Operating and Maintenance Instructions thoroughly before installing or servicing this equipment. ! Maintenance & repair should be handled by a factory authorized agent. Before doing any maintenanceor repair, contactAPW Wyott.
INSTALLATION INSTRUCTIONS 1. 2. Select the sit for your unit. Using the base as a template, drill a 1/4 diameter hole through your counter. 3. Attach the base to the counter with the oval head screws, flat washers and keps nuts. NOTE: Clean the machine before using it for the first time. ASSEMBLY 1. Attach the machine body onto the base. Turn the body back and forth slightly to make sure it is seated properly. 2. Widen the ends of the dispensing lever, and insert them through the holes in the base.
CLEANING 1. Disassemble the machine and wash all parts in detergent and water, running the brush through the discharge tube assembly and through the spout. CAUTION: Do not drop the valve parts or wash them with other metallic objects. Be sure the 0 Rings are in the grooves of both the spout and piston stem. If they are missing or damaged, the dispenser will leak. 2. Rinse well, first in hot water and then in iced water to cool the parts before filling the. Machine with cream. 3.
APW WYOTT EQUIPMENT LIMITED WARRANTY APW Wyott Foodservice Equipment Company warrants it's equipment against defects in materials and workmanship, subject to the following conditions: This warranty applies to the original owner only and is not assignable. Should any product fail to function in its intended manner under normal use within the limits defined in this warranty, at the option of APW Wyott such product will be repaired or replaced by APW Wyott or its Authorized Service Agency.
