Operating instructions

HEAT
HOLD
When done with COOK, unit beeps 1 long time and switches to HOLD
temperature. Display shows HOLD Set Point temp. Example is 150°F.
(Press “TIME” key to recall elapsed HOLD time).
Press “ZONE” button to cycle to OFF immediately.
HEAT
HOLD
Once max HOLD time reached, the unit beeps 2 times, shows “DONE”.
Continues to operate at HOLD temp. The control will continue to
increment the elapsed HOLD time in the background, alternating on the
display between “done” and the HOLD Set Point. (Press “TIME” key to
see elapsed HOLD time).
Press “ZONE” key to acknowledge and advance to OFF.
If the user selected unlimited HOLD time, the time continues to increment
in the background but will never say “done”.
HEAT
HOLD
1
1
1
Alternate every 1 sec.
BUN WARMER OPERATION
Bun Warmer Operation:
When the bun warmer option is selected, and a corresponding output board connected, the following
applies:
Bun Warmer Power Limit Technology:
When the bun warmer is enabled and attached, the control locks out the bun warmer output any time both
zone elements are on. Once only a single zone element is on, the bun element is allowed to cycle. This
prevents the control from having all (3) elements on simultaneously. This feature is only active when the
control is in the Hot Dog Mode, with the Bun Warmer selected.
Cook-To-Hold Stepped Transition:
When the programmed Cook Time is reached, the control will drop to an Intermediate Temperature step for
the Intermediate Time Period. After the Intermediate Time is complete, the control will switch to the HOLD
Temperature. The Stepped Transition will not be displayed or otherwise noted to the user. The intermediate
step is to keep internal food temperatures above minimum levels.
Intermediate Temperature = Average (COOK Temp; HOLD Temp)
Intermediate Time = 10 minutes
Temperature Offsets:
The control in HOT DOG mode has no temperature offset. The control in SHELF WARMER mode has an
adjustable offset described elsewhere.
Cycle Advance:
Per diagram above, the User can force advancement to the next cycle by continued pressing of the ZONE
key: 1. OFF (starting mode when unit switched on) 2. PREHEAT 3. COOK 4. HOLD 5. OFF
The zones operate independently. If desired, a zone can be advanced to OFF while the other zone is still
operating.
HEAT
HEAT
HOLD
HOLD
1
2
BUNS
Press “BUNS” key. Top display reads “Buns”, bottom display shows
current temperature and BUNS LED lights to show the temperature
setting. All other LED’s are off. After 3 seconds, reverts to previous
display.
Programming is done similar to programming other settings, i.e.
Press & hold button 3 seconds, temperature and LED flashes,
adjust. Accept by pressing key again or 5 seconds timeout.
This programming is kept separate from programming the other
time/temp items.
9