Product manual

GAS PRESSURE
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system
during any pressure testing of that
system at test pressures in excess of 1/2 psi (3.45 kPa)
The appliance must be isolated from the gas supply piping system by closing its individual manual shut-
off valve during any pressure testing of the gas supply piping system at test pressures equal to or less
than 1/2 psi (3.45 kPa)
Maintenance and repair should be handled by a factory authorized agent. Before doing any mainte-
nance or repair, contact APW/Wyott.
! CAUTION
These models are designed, built and sold for commercial use. If these models are positioned so the general public can use
the equipment, make sure that all cautions, warnings and operating instructions are clearly posted near each unit so that
anyone using the equipment will use it correctly and not injure themselves or harm the equipment.
! WARNING
Improper installation, operation, service or maintenance can cause property damage, injury or death. Read
these instructions thoroughly before installing, operating, maintaining or servicing this equipment.
Install per the spacing requirements listed in the installation section of this manual. We strongly recommend
having a competent professional install this equipment. Such a person should be familiar with local gas
regulations. A gas company representative should approve the completed installation.
Instructions to be followed if any one smells gas should be posted in a prominent place. These may be
obtained from the gas supplier.
! WARNING
FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE LIQUIDS AND
VAPORS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. KEEP THE AREA FREE AND
CLEAR OF COMBUSTIBLES. (SEE ANZI Z83.14B, 1991)
2
Congratulations on your purchase of APW/Wyott commercial cooking or refrigeration equipment. APW/Wyott takes pride in
the design and quality of our products. When used as intended and with proper care and maintenance, you will experience
years of reliable operation from this equipment. To assure best results, it is important that you read and follow the instruc-
tions in this manual carefully.
TABLE OF CONTENTS:
Safety Precautions ........................................... 4
Specifications ...................................................5
Installation .......................................................5
European Installation .......................................5
Lighting Instructions ......................................... 6
Operating Instructions ......................................8
Cleaning / Maintenance .................................... 9
Service / Repair ............................................. 10
Conversion ..................................................... 10
Parts Diagram ................................................ 11
Parts List ...................................................12-15
Warranty ........................................................ 16
LOCATION OF DATA PLATE
The data plate is located on the back side of the front panel.