Aqara Hub M1S Quick Start Guide · · · · · · · · · · · · · · · · · · · · · · · 01 Aqara Hub M1S(閘道器)· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14 Aqara Hub M1S Schnellstartanleitung · · · · · · · · · · · · · · · · · · 21 Guide de démarrage rapide du Hub Aqara M1S · · · · · · · · 30 Guía rápida de Aqara Hub M1S ··························· 39 Guida rapida all’M1S Hub Aqara · · · · · · · · · · · · · · · · · · · · · · · · · 48 Aqara Hub M1S: Краткое руководство · · · · · · · · · · · · · · · ·
Product Introduction Aqara Hub M1S is a smart home control center, which connects Zigbee devices to Wi-Fi network. At the same time, it can manage and control smart scenes, and can conveniently control smart devices, such as plug, switch, bulb, curtain and so on. Button Single Press: Turn on/off night light Long Press (10 seconds): Reset thenetwork connection Press 10 times: Restore the factory default settings Audio Output Night Light * For more details about Aqara products, please visit www.aqara.
Quick Setup 1. Download the app Scan the QR code, or search for "Aqara Home" in the app store. Download and install the Aqara Home app. If you want to use the Mi Home app, please restore the factory settings, and then press the button twice within 10 seconds after you hear the voice prompt "Ready to connect. Please open the Aqara Home app". You can then add the hub using the Mi Home app.
2. Add Hub M1S 1 Plug the hub into the socket and wait until the yellow light blinks quickly. Make sure your mobile Phone is connected with 2.4 GHz Wi-Fi network. * If you are using a dual band router, please disable the 5 GHz Wi-Fi network. * Keep your phone close to the hub and make sure both of them are connected with the same Wi-Fi network. 2 Please open the Aqara Home app, click “+” in the upper right corner, select “Hub M1S” and follow the instructions to complete adding the hub.
3. Add bridge accessories After the hub is connected, please open the Aqara Home app, go to “Accessories” page and tap “+” in the top right corner, and select the accessory to add to the hub according to instructions. Please refer to bridge accessory quick start guide for more details. Installation 1. To ensure steady communication between the hub and its accessories, it is recommended to install the hub at the center of the area where the accessories are located. 2.
Indicator Light Description Indicator light status Hub status Yellow light is always on Starting up Yellow light flashes Waiting for network connection Yellow or white light flashes Connecting to network White light is always on Network configurations are not completed within 15 minutes after start-up Purple light flashes Allowed to add the sub-device Indicator light is off Works normally or powered off Notice 1.
2. Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKit- enabled Aqara Hub is secured by HomeKit technology. 3. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Wi-Fi Operation Frequency: 2412-2472 MHz Wi-Fi Maximum Output Power: ≤ 20 dBm Zigbee Operation Frequency: 2405-2480 MHz Zigbee Maximum Output Power: ≤ 13 dBm * Maximum Transmit Power and Working Frequency for EU only. Online Customer Service: www.aqara.com/support Email: support@aqara.com Manufacturer: Lumi United Technology Co., Ltd. Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China. Warnings 1.
4. Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation. 5. Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional. 6. This product is only suitable for improving the convenience of your home life and reminding you about the device status. It should NOT be used as security equipment for home, building, warehouse or any other places.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. RF Exposure statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES‐003. This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
fonctionnement. Cet appareil numérique de la Classe B conforme à la norme NMB‐003 du Canada. Cet appareil est conforme à la norme RSS ‐ 247 d'Industrie Canada. Le fonctionnement est soumis à la condition que cet appareil ne provoque pas d'interférences nuisibles. Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour unenvironnement non contrôé. Cet équipement doit être installé et fonctionner à au moins 20cm de distance d’un radiateur ou de votre corps.
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
產品介紹 Aqara閘道器M1S是智能家庭控制中心,可實現Wi-Fi與Zigbee類 設備之間的互聯互通,以及管理和控制智能場景,可方便快捷地 控制插座、開關、燈泡、窗簾等智能設備。 按鍵 按一次:開/關夜燈 長按10秒:重置網絡 按十次:恢復出廠設置 揚聲器 夜燈 *更多Aqara產品詳情,請登錄www.aqara.
快速設定 1、 下載客戶端 在App Store搜尋並安裝「Aqara Home」 ,或掃描以下二維碼下載 安裝Aqara Home app。 *如需使用Mi Home app,請在出廠狀態下,聽到語音「等待連接中,請打開 Aqara Home app」之後10秒內,連按按鍵兩下。 2、 新增閘道器 1 首先將閘道器通電,等到黃燈閃爍。 確保手機已連線到2.
*若使用雙頻路由器,請先關閉5GHz Wi-Fi網路。 *請將手機儘量靠近閘道器進行連接,同時請確保手機與閘道器處於同一Wi-Fi 網路。 2 開啟Aqara Home app,在 「配件」頁面按右上角的「+」 ,選擇「網 關M1S」 ,並依照app指示進行操作。 *iOS用戶:請根據app提示掃描包裝盒或手動輸入閘道器上的HomeKit設置代 碼,然後按照提示完成添加。 添加成功後,即可在Apple「家庭」app中查看到已 添加的闸道器。 请妥善保存HomeKit设置代码。 3 如連線不成功,請長按10秒閘道器按鍵,直到黃燈快速閃爍後 重新連線。 3、 新增子設備 闸道器添加成功后,请参考子设备说明书进行添加子设备。子设 备添加成功后,支持HomeKit的子设备会自动同步至HomeKit, 可通过Apple「家庭」app查看。 16
安裝方法 1、为確保閘道器與子設備通訊穩定,建議將閘道器安裝在子設備 所在區域的中心位置。 2、在室內無遮擋情況下,閘道器與子設備間的通訊距離可達30公 尺,具體取決於當地環境。 指示燈說明 指示燈狀態 閘道器狀態 黃色閃爍 等待連接網絡 正在啟動 黃色常亮 正在連接網絡 黃色或白色閃爍 啟動後15分鐘,未配置網絡 白色常亮 允許添加子設備 紫色閃爍 正常工作或未通電 熄滅 17
使用者資訊 1、本產品為支持HomeKit的配件,推薦使用最新版iOS或iPadOS。 要遠程控制支持HomeKit的配件或設置自動化,需要安裝一臺 HomePod或Apple TV或一臺已設為家居中樞的iPad,建議將軟 件和操作系統更新到最新版本。 2、閘道器與iPhone、iPad、Apple Watch、HomePod或Mac之間的 通訊受HomeKit技術保護。 3、使用帶有Works with Apple的徽章,意味著該配件經過專門設 計,可與徽章中所標識的技術配合使用,并且已通過開發者認 證,符合Apple性能標準,Apple不對此產品的操作或符合的安 規標準負責。 基本參數 產品型號:HM1S-G01 產品尺寸:80×80×41.5公釐(3.15×3.15×1.63英吋) 無線通訊協定:Wi-Fi IEEE 802.11 b/g/n 2.4 GHz、Zigbee 輸入電壓:100—240V~, 50/60Hz, 0.
工作濕度:0%~95%RH,無冷凝 Wi-Fi工作頻率:2412 MHz-2472 MHz Wi-Fi發射功率:≤ 20 dBm Zigbee工作頻率: 2405-2480 MHz Zigbee發射功率: ≤ 13 dBm *发射功率和工作频率仅适用于欧盟國家。 網站支援:www.aqara.com/support 售後電子信箱:support@aqara.
5、請不要嘗試自行維修本產品,應由授權的專業人士進行此項工 作。 6、本產品僅適用於提升家居生活娛樂性、便捷度,以及用於設備 狀態提醒,不應做為家居、樓宇、倉庫或其他任何場所的安防設 備使用。如有用戶違反產品使用說明及本注意事項,將產品用 於安防領域,製造商對因此造成的任何風險和財產損失不承擔 責任。 7、電源插頭用作斷開設備,在使用過程中應保持隨時可用。為了 完全斷開設備的連接,應將電源插頭與主電源插座完全斷開。 20
Produktübersicht Aqara Hub M1S ist ein intelligentes Heim-Kontrollzentrum, das eine intelligente Verbindung zwischen WI-FI und ZigBee-Geräten realisieren kann. Gleichzeitig kann es intelligente Szenen verwalten und steuern und intelligente Geräte wie Stecker, Schalter, Glühbirne, Vorhang usw. zweckmäßig steuern.
Schnelleinrichtung 1. Laden Sie die App herunter Laden Sie “Aqara Home” aus dem App Store herunter oder scannen Sie den QR Code, um die Aqara Home-App herunterzuladen. * Wenn Sie die Mi Home APP verwenden möchten, stellen Sie bitte die Werkseinstellungen wieder her und drücken Sie dann innerhalb von 10 Sekunden zweimal auf die Taste, nachdem Sie die Sprachaufforderung „Bereit zur Verbindung. Bitte öffnen Sie die Aqara Home App“ gehört haben.
2. Fügen Sie den Hub hinzu 1 Stecken Sie den Hub in die Steckdose und warten Sie, bis das gelbe Licht schnell blinkt. Stellen Sie sicher, dass Ihr Mobiltelefon mit dem 2,4-GHz-WI-FI-Netz verbunden ist. * Wenn Sie einen Dualband-Router verwenden, deaktivieren Sie bitte das 5-GHz-WLAN-Netzwerk. * Halten Sie das Telefon nahe an den Hub und stellen Sie sicher, dass beide sich in demselben WLAN-Netzwerk befinden.
3. Vernetztes Zubehör hinzufügen Sobald der Hub verbunden ist, öffnen Sie bitte die Aqara Home-App, öffnen Sie dann die Seite „Zubehör“ und berühren Sie „+“ oben rechts. Wählen Sie nun das Zubehör aus und fügen Sie es gemäß den Anleitungen zum Hub hinzu. Weiterführende Angaben entnehmen Sie bitte der Bedienungsanleitung für vernetzte Geräte. Montage 1.
Beschreibung Meldeleuchte Status des Indikators Status des Hub Gelb immer an Startet Gelb blinkt Warten auf eine Verbindung zum Netzwerk Gelb oder Weiß blinkt Verbindet zum Netzwerk Weiß immer an 15 Minuten nach dem Start ist das Netzwerk nicht konfiguriert Lila blinkt Hinzufügen von Untergeräten zulassen Aus Normaler Betrieb oder nicht eingeschaltet Hinweis 1. Ein Kunde, der ein Apple TV (4.
2. Die Kommunikation zwischen iPhone, iPad, Apple Watch, HomePod oder Mac und dem HomeKit-aktivierten Mi Smart Home Hub wird durch die HomeKit-Technologie gesichert. 3. Die Verwendung der Plakette "Works with Apple" bedeutet, dass der Zubehörteil speziell für die in der Plakette identifizierte Technologie entwickelt und vom Entwickler zertifiziert wurde, um die Leistungsstandards von Apple zu erfüllen.
Wi-Fi Betriebsfrequenz: 2412-2472 MHz Wi-Fi Maximale Übertragungsleistung: ≤ 20 dBm Zigbee Betriebsfrequenz: 2405-2480 MHz Zigbee Maximale Übertragungsleistung: ≤ 13 dBm * Maximale Übertragungsleistung und Betriebsfrequenz nur für EU. Online-Kundendienst: www.aqara.com/support E-Mail: support@aqara.com Hersteller: Lumi United Technology Co., Ltd. Adresse: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China. Warnhinweise 1.
Produkt haben. 4. Stellen Sie dieses Produkt NICHT nahe einer Heizquelle auf. Platzieren Sie das Gerät ausschließlich Deutsch dann in einem Gehäuse, wenn für AUSREICHENDE Belüftung gesorgt wurde. 5. Versuchen Sie NIEMALS dieses Produkt selbst zu reparieren. Reparaturen müssen qualifiziertem Fachpersonal vorbehalten sein. 6. Dieses Produkt eignet sich lediglich für die Verbesserung von Unterhaltungsgeräten, es dient der Bequemlichkeit und verfügt über eine Erinnerungsfunktion für die Geräte im Heim.
EU-Konformitätserklärung Unter normalen Betriebsbedingungen sollte dieses Gerät einen Abstand von mindestens 20 cm zwischen der Antenne und dem Körper des Benutzers einhalten.Hiermit bestätigt [Lumi United Technology Co., Ltd.] dass das Funkgerät des Typs [Hub M1S, HM1S-G01] mit der Verordnung 2014/53/EU in Einklang steht. Der vollständige Wortlaut der EU-Konformitätserklärung ist unter der folgenden Internetadresse abrufbar: http://www.aqara.
Présentation du produit Le Hub Aqara M1S est un centre de contrôle domestique intelligent qui peut réaliser une connexion intelligente entre le Wi-Fi et les appareils Zigbee. Dans le même temps, il peut gérer et contrôler les scènes intelligentes et peut facilement contrôler les appareils intelligents, tels que les prises, les interrupteurs, les ampoules, les rideaux, etc.
Configuration rapide 1. Téléchargez l'application Téléchargez l'application Aqara Home depuis l'App Store, ou en lisant le code QR ci-dessous. * Si vous souhaitez utiliser l'application Mi Home, veuillez restaurer les paramètres d'usine, puis appuyez deux fois sur le bouton dans les 10 secondes après avoir entendu l'invite vocale "Prêt à vous connecter. Veuillez ouvrir l'application Aqara Home".
2. Ajoutez le Hub 1 Branchez le Hub dans la prise et attendez que le voyant jaune clignote rapidement. Assurez-vous que votre téléphone mobile est connecté à un réseau Wi-Fi 2.4 GHz. * Si vous utilisez un routeur double bande, désactivez le réseau Wi-Fi 5 GHz. * Placez votre téléphone près du hub et vérifiez que les deux appareils sont connectés au même réseau Wi-Fi.
3. Pour relier d'autres accessoires au Hub Une fois le Hub connecté, ouvrez l'application Aqara Home, allez à la page Accessoires et touchez le signe "+" situé au coin supérieur droit; ensuite, sélectionnez l'accessoireet ajoutez-le au hub en suivant les instructions. Pour de plus amples détails, consultez le mode d'emploi de l'accessoire. Installation 1.
Signification des états des voyants Etat des voyants Etat du Hub Lumière jaune toujours allumée Démarrage en cours Lumière jaune clignotant En attente de connexion au réseau Lumière jaune ou blanche clignote Connexion au réseau Lumière blanche toujours allumée 15 minutes après le démarrage, le réseau n'est pas configuré Lumière violette clignotant Autoriser l'ajout d'un accessoire Eteindre Fonctionne normalement ou n'est pas alimenté Remarque 1.
2. La communication entre l'iPhone, l'iPad, l'Apple Watch, le HomePod ou le Mac et leHubest sécurisée par la technologie HomeKit. 3. L'utilisation du badge Works with Apple signifie qu'un accessoire a été conçu pour fonctionner spécifiquement avec la technologie identifiée dans le badge et a été certifié par le développeur pour répondre aux normes de performance d'Apple. Apple n'est pas responsable du fonctionnement de cet appareil ni de sa conformité aux normes de sécurité et réglementaires.
Wi-Fi Fréquence de fonctionnement: 2412-2472 MHz Wi-Fi Puissance maximale de transmission: ≤ 20 dBm Zigbee Fréquence de fonctionnement: 2405-2480 MHz Zigbee Puissance maximale de transmission: ≤ 13 dBm * Puissance maximale de transmission et fréquence de fonctionnement pour l'UE uniquement. Service clientèle en ligne : www.aqara.com/support Courriel : support@aqara.com Fabricant : Lumi United Technology Co., Ltd. Adresse : 8th Floor, JinQi Wisdom Valley, No.
3. Méfiez-vous de l'humidité, et n'éclaboussez pas l'appareil d'eau ni d'autres liquides. 4. Ne placez PAS ce produit près d'une source de chaleur. Ne le mettez PAS dans un lieu clos, à moins qu'il ne soit suffisamment ventilé. 5. N'essayez PAS de réparer vous-même cet appareil. Toute réparation doit être effectuée par un professionnel agréé. 6.
Déclaration de conformité UE Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance de séparation d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.Par la présente, [Lumi United Technology Co., Ltd.] déclare que cet équipement radio de type [Hub M1S, HM1S-G01] est conforme à la Directive européenne 2014/53/UE. L’intégralité de la déclaration de conformité pour l’UE est disponible à l’adresse suivante : http://www.aqara.
Presentación del producto Aqara Hub M1S es un centro de control doméstico inteligente, que puede realizar una conexión inteligente entre Wi-Fi y dispositivos Zigbee. Al mismo tiempo, puede administrar y controlar escenas inteligentes, y puede controlar convenientemente dispositivos inteligentes como enchufes, interruptores, bulbos, cortinas y así sucesivamente.
Configuración rápida 1. Descarga la aplicación Descarga “Aqara Home” de la App Store o escanea el siguiente código QR para descargar la aplicación Aqara Home. * Si desea utilizar la aplicación Mi Home, por favor, restaure la configuración de fábrica y luego presione el botón dos veces en 10 segundos después de escuchar el mensaje de voz "Listo para conectar. Por favor, abra la aplicación Aqara Home".
2. Agregar el centro 1 Conecte el Hub al enchufe y espere hasta que la luz amarilla se desconecte rápido. asegúrese de que su teléfono móvil está conectado a una red Wi-Fi de 2.4 GHz. * Si está utilizado un router de doble banda, desactive la red Wi-Fi de 5 GHz. * Ponga su teléfono cerca del Hub, y asegúrese de que está conectado a la misma red Wi-Fi.
3. Añadir accesorios conectados Una vez que se ha conectado el Hub, abra la aplicación Aqara Home, vaya a la página de “Accesorios” y pulse “+” en la esquina superior derecha, y seleccione el accesorio para agregar el Hub siguiendo las instrucciones. Para más información, consulte el manual del usuario del accesorio conectado. Installation 1. Para garantizar una comunicación estable entre el Hub y sus accesorios, se recomienda instalar el Hub en el centro del área donde se encuentran los accesorios. 2.
Descripción de la luz indicadora Estado del indicador Estado de hub Amarillo siempre encendido Encendiendo Amarillo intermitente Esperando para conectarse a la red Amarillo o blanco intermitente Conectando a la red Blanco siempre encendido 15 minutos después del inicio, la red no está configurada Púrpura intermitente Permitir agregar dispositivos secundarios Apagado Trabajo normal o sin electricidad Nota 1.
2. La comunicación entre iPhone, iPad, Apple Watch, HomePod o Mac y Mi Smart Home Hub habilitado para HomeKit está asegurada por la tecnología HomeKit. 3. El uso de la insignia Works with Apple significa que un accesorio ha sido diseñado para funcionar específicamente con la tecnología Identificada en la insignia y ha sido certificado por el desarrollador para cumplir con los estándares de rendimiento de Apple.
Wi-Fi Frecuencia de trabajo: 2412-2472 MHz Wi-Fi Potencia de transmisión máxima: ≤ 20 dBm Zigbee Frecuencia de trabajo: 2405-2480 MHz Zigbee Potencia de transmisión máxima: ≤ 13 dBm * Potencia de transmisión máxima y la banda de frecuencia de trabajo solo son aplicables en EU. Servicio de Atención al Cliente en línea: www.aqara.com/support Correo electrónico: support@aqara.com Fabricante: Lumi United Technology Co., Ltd. Dirección: 8th Floor, JinQi Wisdom Valley, No.
3. Evite la humedad y NO vierta agua ni otro líquidos sobre el producto. 4. NO instale el producto cerca de una fuente de calor. NO lo instale en lugares confinados, a menos que haya ventilación suficiente. 5. NO intente reparar este producto usted mismo. Las reparaciones deben ser realizadas por un profesional autorizado. 6. Este producto ha sido diseñado para mejorar la vida en el hogar. NO debe utilizarse como un equipo de seguridad para el hogar, edificios, almacenes u otros lugares.
Declaración de conformidad de la UE En condiciones de uso normal, este equipo debe mantenerse a una distancia de separación de al menos 20 cm entre la antena y el cuerpo del usuario.Por la presente, [Lumi United Technology Co., Ltd.] declara que el tipo de equipo radioeléctrico [Hub M1S, HM1S-G01] cumple con la Directiva 2014/53/UE. Encontrará el texto completo de la declaración de conformidad de la UE en esta dirección de Internet: http://www.aqara.
Profilo del prodotto Aqara Hub M1S è un centro di controllo per casa intelligente, che è capace di realizzare connessioni intelligenti tra dispositivi Wi-Fi e Zigbee. Allo stesso tempo, può gestire e controllare scene intelligenti e può controllare comodamente i dispositivi intelligenti, come spina, interruttore, lampadina, tenda e così via.
Configurazione rapida 1. Scarica l'app Per operare con una vasta gamma di dispositivi intelligenti, scaricare l'APP Aqara Home da App Store / Google Play o scansionare il seguente codice QR per scaricare. * Se si desidera utilizzare l'APP Mi Home, ripristinare le impostazioni di fabbrica, e poi premere due volte il pulsante entro 10 secondi dopo il messaggio vocale "Pronto per la connessione. Aprire l'app Aqara Home".
2. Aggiungi l'Hub 1 Inserisce l'hub nella presa e aspetta che la luce gialla lampeggi rapidamente. Assicurati che il tuo cellulare sia collegato con una rete Wi-Fi con frequenza di 2.4 GHz. * Se si sta utilizzando un router dual band, disabilitare la rete Wi-Fi a 5 GHz. * Tenere il telefono vicino all'Hub e assicurarsi che siano collegati alla stessa rete Wi-Fi.
3. Aggiunta di dispositivi secondari Dopo aver collegato l'hub, apri Aqara Home APP, vai alla pagina “Accessori” e tocca “+” nell'angolo in alto destro, scegliere l'accessorio da aggiungere all'hub secondo le istruzioni. Per ulteriori dettagli, consultare la guida di avvio rapido degli accessori bridge. Installazione 1. Per garantire una comunicazione costante tra l'hub e i suoi accessori, si consiglia di installare l'hub al centro dell'area in cui si trovano gli accessori. 2.
Descrizione spia Stato Indicatore Stato Hub Giallo sempre acceso Avvio in corso Giallo lampeggiante In attesa della connessione rete Giallo o bianco lampeggiante Connessione della rete in corso Bianco sempre acceso La rete non è configurata dopo 15 minuti dall'avvio Viola lampeggiante Consente ad aggiungre dispositivo secondario Spento Funzionamento normale o non alimentato Avviso legale 1.
2. La comunicazione tra iPhone, iPad, Apple Watch, HomePod o Mac e il Mi Smart Home Hub abilitato per HomeKit è protetta dalla tecnologia HomeKit. 3. L'etichetta Works with Apple significa che tale accessorio è stato progettato per funzionare specificamente con la tecnologia identificata nell'etichetta ed è stato certificato dallo sviluppatore per soddisfare gli standard prestazionali di Apple.
Wi-Fi Frequenza di lavoro: 2412-2472 MHz Wi-Fi Potenza di trasmissione massima: ≤ 20 dBm Zigbee Frequenza di lavoro: 2405-2480 MHz Zigbee Potenza di trasmissione massima: ≤ 13 dBm * Potenza di trasmissione massima e frequenza di lavoro solo per EU. E-mail: support@aqara.com Servizio clienti online: www.aqara.com/support Produttore: Lumi United Technology Co., Ltd. Indirizzo: Ottavo piano, Valle della Saggezza JinQi, Via Tangling n.
3. Attenzione all’umidità: non versare acqua o altri liquidi sul prodotto. 4. Non mettere il prodotto vicino a una sorgente di calore. Non mettere in aree chiuse a meno che non vi sia un livello di 5. ventilazione normale. Non cercare di riparare il prodotto autonomamente. Tutti gli interventi di riparazione dovrebbero essere eseguiti da professionisti autorizzati. 6.
Dichiarazione di conformità UE In condizioni d'uso normali, questa apparecchiatura deve essere mantenuta a una distanza di almeno 20 cm tra l'antenna e il corpo dell'utente.Con la presente, [Lumi United Technology Co., Ltd.] dichiara che l'apparecchiatura radio di tipo [Hub M1S, HM1S-G01] è conforme alla Direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: http://www.aqara.
Общая информация о продукте Aqara Hub M1S - это центр управления умным домом, который позволяет установить умное соединение между сетью Wi-Fi и устройствами Zigbee. В то же время с помощью него можно управлять умной подсветкой, а также сделать более удобным использование розеток, выключателей, ламп, штор и прочих умных приборов.
Быстрая настройка 1. Загрузите приложение Загрузите приложение Aqara Home из App Store или отсканируйте следующий QR-код для загрузки приложения Aqara Home. * Если вы хотите использовать приложение Mi Home, восстановите заводские настройки, а затем дважды нажмите кнопку в течение 10 секунд после того, как вы услышите голосовой сигнал: "Готово к подключению. Пожалуйста, откройте приложение Aqara Home".
2. Добавьте центр умного дома в приложение 1 Подключите центр умного дома к розетке и подождите, пока желтый индикатор не начнет быстро мигать. Убедитесь, что ваш мобильный телефон подключен к сети Wi-Fi с частотой 2,4 ГГц. * Если вы используете двухдиапазонный маршрутизатор, отключите диапазон 5 ГГц в вашей сети Wi-Fi. * Расположите телефон близко к контроллеру и убедитесь, что они подключены к одной и той же сети Wi-Fi.
3. Добавьте дочерние устройства После подключения контроллера откройте приложение Aqara Home, перейдите на страницу "Аксессуары" и нажмите "+" в верхнем правом углу и выберите аксессуар для добавления к контроллеру в соответствии с инструкциями. Для получения более подробной информации обратитесь к руководству пользователя данного дочернего устройства. Монтаж 1.
Описание световых индикаторов Состояние индикатора Статус центра умного дома Желтый всегда яркий Выполняется включение Желтый мигает Ожидание подключения к сети Желтый или белый мигает Выполняется подключение к сети Белый всегда яркий Через 15 минут после запуска сеть не настроена Фиолетовый мигает Разрешить добавление дочерних устройств Не горит Нормальная работа или нет питания Примечание 1.
местоположение, датчик обнаружения или Действий аксессуара. 2. Связь между iPhone, iPad, Apple Watch, HomePod или Mac и Hub M1S с поддержкой HomeKit обеспечивается технологией HomeKit. 3. Использование знака «Works with Apple» означает, что аксессуар был разработан для работы с указанной технологией, и сертифицирован в соответствии со стандартами производительности Apple. Apple не несет ответственности за работу данного устройства, или его соответствию стандартам безопасности и нормативным требованиям.
Температура эксплуатация: -10° — +40°C (14° — 104°F) Диапазон рабочей влажности: 0 - 95% RH, без конденсации Wi-Fi Рабочая частота: от 2412 МГц до 2472 МГц Wi-Fi Максимальная мощность передатчика: ≤ 20 дБм Zigbee Рабочая частота: от 2405 МГц до 2480 МГц Zigbee Максимальная мощность передатчика: ≤ 13 дБм * Максимальная мощность передатчика и pабочая частота только для ЕU Правила и условия хранения и транспортировки Оборудование должно быть защищено от внешних воздействий.
Онлайн-служба поддержки: www.aqara.com/support Email: support@aqara.com Изготовитель: Lumi United Technology Co., Ltd. Адрес: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China. Сделано в Китае Спецификации 1. Этот прибор - НЕ игрушка. Пожалуйста, не допускайте к нему детей. 2. Данный прибор предназначен только для использования внутри помещений. Не используйте его во влажных средах или на открытом воздухе. 3.
5. Не пытайтесь отремонтировать прибор самостоятельно. Все ремонтные работы должны выполняться авторизованным специалистом. 6. Этот прибор предназначен только для повышения удобства, качества домашних развлечений и напоминания о статусе устройства. Он не предназначен для использования в качестве охранного оборудования для дома, здания, склада или любых других мест. Если пользователь нарушает инструкции по использованию прибора, производитель не несет никакой ответственности за риски и повреждения имущества.
製品紹介 Aqara Hub M�Sは、Wi-FiとZigbeeデバイス間のスマート接続を 実現するスマートホームコントロールセンターです。同時に、 スマー トシーンを管理制御し、 プラグ、 スイッチ、バルブ、 カーテンなどのス マートデバイスを簡単に制御できます。 ボタン クリック:ナイトライトのオン/オフ 長押し(��秒):ネットワーク接続 をリセットします ��倍押し:工場出荷時のデフォ ルト設定に戻します スピーカー 夜の光 * Aqara製品の詳細については、www.aqara.
クイック設定 �.
�. ハブの追加 1 ハブをソケットに接続し、 黄色のLEDがすばやく点滅するまで待 ちます。携帯電話が�.� GHz Wi-Fiネットワークに接続されてい ることを確認します。 * デュアルバンドルーターを使用する場合、 まず�GHz Wi-Fiネットをオフにしてく ださい * 接続するには、携帯をできるだけハブに近づけるとともに、携帯とハブが同一 Wi-Fiネットにあることを確認してください 2 Aqara Homeアプリを開き、 右上の「+」 をクリックし、 「Aqara Hub M�S」 を選択し、指示に従ってハブの追加を完了してくだ さい。 * iOSユーザー:手順に従って製品ボックスをスキャンするか、 ハブにHomeKitコ ードを手動入力してセットアップを完了します。正常追加されたら、Apple Homeアプリでハブを確認できます。HomeKitコードはきちんと保管してくだ さい。 3 ハブの追加失敗の場合は、 黄色ランプがすばやく点滅するまで ハブのボタンを��秒以上押してから追加し直してください。 �.
リー」画面の右上にある 「+」 をクリックシすると、 アクセサリー追加の 画面に遷 移します。 そして追加必要のあるサブ設備を選択して、指 示に従って操作 します。詳細はサブ設備説明書をご参照ください。 インストール �. ハブと付属品が確実に通信できるよう、付属品がある場所の中 央にハブを設置することをお勧めします。 �.
ユーザーのご注意 �. tvOS��以降が搭載されたApple TV(第�世代以降)、iOS��以 降が搭載 されたiPad、 またはHomePodを所有しているお客 様は、時間、場所、 セ ンサーの検出、 アクセサリの動作などのトリ ガーを介して、自宅から HomeKit対応アクセサリーを制御する ことができます。 �. iPhone、iPad、Apple Watch、HomePod、 またはMacと HomeKit対応 のMi Smart Home Hubとの通信は、 HomeKit技術によって保護され ています。 �. Works with Appleバッジを使用するということは、 アクセサリ が特定さ れたテクノロジで動作するように設計されていることを 意味します。開発者によってAppleのパフォーマンス基準を満た すことが認定されて います。Appleは、 このデバイスの操作また は安全および規制基準への 準拠に対して責任を負いません。 仕様 モデル:HM�S-G�� 寸法:��×��×��.
ワイヤレス通信規格:Wi-Fi IEEE ���.�� b/g/n �.� GHz、Zigbee 入力電圧:���—���V~, ��/��Hz, �.�A 動作温度:-��°~+��°C 動作湿度:�~��% RH、結露なきこと Wi-Fi 動作周波数:����-���� MHz Wi-Fi 最大送信電力:≤ �� dBm Zigbee 動作周波数:����-���� MHz Zigbee最大送信電力:≤ �� dBm *送信電力と動作周波数はEU諸国にのみ適用されます。 ウェブサイト:www.aqara.com/support アフターサービスEメル:support@aqara.com メーカー:深セン緑米聯創科技有限会社 住所:広東省深セン市南山区留仙大道塘嶺路�号金キ智谷 ビル�階 警告 �.
�. 本製品は屋内利用のみを意図しています。高湿の環境や 屋外 では使用しないでください。 �. 湿気に注意してください。水やその他の液体が本製品に触 れ ないようにしてください。 �. 本製品を熱源の付近に配置しないでください。換気が行き 届 いていない限り、本製品をエンクロージャ内に配置しな いでくだ さい。 �. ご自身で本製品の修理を試みないでください。全ての修理 は 資格を有する技術者が行う必要があります。 �. 本製品は環境の改善、 ご家庭の便利さ改善とデバイス状態のお 知らせの目的のみに適しています。 ご家庭、 ビル、倉庫、 その他い かなる場所のセキュリティ機器として利用することはできません。 ユーザーが製品の使用指示に違反する場合、製造元はいかな るリスクや物損にも責任を負うことはありません。 �.
73
74
67
75
76