User's Guide

Chapter 3 Settings
23
These setting items allow you to customize BK7007, set the
date, time and enter other preferences for the unit.
Language
To set system language for the reader.
Restore Defaults
To restore the Reader’s settings to defaults.
All settings will be restored. All DRM contents and activation
will be deleted. You are required to authorize the reader
again through ADE after system restored.
Date & Time
To set the clock and date, time zone, daylight saving time
 Tap on the desired item, then flick up/down to adjust the
desired value.
 Press Apply button to confirm, press Cancel button to
cancel the setting.
Note: Time zone setting is needed to calculate the expiry
duration for book borrowing / returning.
Display Settings
To set the display brightness for the reader.
Device Standby
 To enable / disable auto standby mode, also set the time
for the auto standby mode
 Press <Power> button to manually set the reader to
standby mode. Press <Power> button once to wake up
the reader from standby mode.