User's Guide

Chapter 1 Basics

Charging the Reader

 You need to charge the reader prior to using it for the first

time or when battery power is low.

 Charge the reader using AC adapter with output 5V,

1.2A.

 Charging through PC may not be able to fully charge the

reader due to the low output charging current from PC

USB port.

 Please turn the reader to standby mode to shorten the

charging process.

 It will take about 6 hours to fully charger the reader in

standby mode (LCD off)

 When DC /USB power cable is connected to the reader

for charging, the reader will enter into standby mode after

remains idle for 60 s. Press the [Power] button to wake up

the reader. The battery status is displayed at the bottom

left corner.