Instruction Manual

Residential Series

Submittal Data

AB3336SH

View -

ht Hand Shown

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

36½"

40½"

16½"± 16½"±

15½"±

Ribbed Bottom For

Slip Resistance

33"

42" O.D.

5" Threshold

80"

83"

84"

35" O.D.

34½" I.D.

Important Note:

Aqua Bath Recommends The Use Of A

Slide Bar As An Accessory In The Unit Rather

han The Use Of A Glide Bar / Glide Rail.

51"

40½"

ront View and Ri

ht Side View

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.

The field installation instructions must be followed as directed or may void manufacturers warranty

Reference installation instructions for AB3336SH.

Page AB-9

12/08

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446

www.aquabath.com

PAGE 1
6½"± 16½"± 40½" Ribbed Bottom For Slip Resistance For additional information, call the Aqua Bath Customer Service Department At 1-800-232-2284 15½"± CL 36½" Residential Series Submittal Data 40½" AB3336SH Top View - Right Hand Shown Important Note: Aqua Bath Recommends The Use Of A Slide Bar As An Accessory In The Unit Rather Than The Use Of A Glide Bar / Glide Rail. 84" 83" 80" 51" 5" Threshold 33" 34½" I.D. 42" O.D. 35" O.D.
PAGE 2
For additional information, call the Aqua Bath Customer Service Department At 1-800-232-2284 Residential Series AB3336SH Model AB3336SH (AB3336SH-L valve on left, AB3336SH-R valve on right). The shower enclosure shall be Aqua Bath Model AB3336SH and shall be molded from a single sheet of vacuum-formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams. Shall meet ANSI 124.2. Unit shall have a backside flame spread of less than 30 (Class B). Shall be designed to meet NAHB.