Small Pool Vacuum System Aspiradora pequena para alberca Item # 182117 Model # SV523 Parts Included
The Aqua EZ Small Pool Vacuum System is a manual pool vacuum system designed specifically for cleaning soft sided above-ground pools with low flow filtration systems. Assembling • Fully extend the telescopic pole by rotating the cam and sliding the pole out, repeat this for both sections of pole. • Next slide pole onto the body lining up the white clips to the holes in the pole. • Then attach hose by applying firm pressure slide hose cuff onto the rear of the vacuum body.
Connecting To Filtration System (Part 2) Once the intake port or vacuum plate has been installed you need to connect your hose to it. Fully submerge hose and vacuum making sure that all air has been removed, any air bubbles will hinder vacuums ability to remove debris. While keeping the hose fully submerged, connect it to the intake connector or return fitting on your pool. Vacuuming When vacuuming your pool start in the center and work your way out. Guide the vacuum at a 45 Degree angle.
Helpful Tips • Vacuum works with suction from pump. Remove or clean cartridge if necessary. Large debris will be trapped in collection bag inside vacuum. • Insure all air is removed from vacuum and hose. Even a small amount of air will affect the performance of cleaner. • Use gentle pressure when vacuuming. DO NOT STAB OR THRUST VACUUM HEAD AGAINST VINYL LINER. • Empty hose and vacuum of water when not in use. • Visit aquaez.com or call directly 1-877-852-4264 if you have additional questions.
