Use and Care Manual

INTRODUCTION

BEFORE YOU USE YOUR OWNER'S MANUAL, PLEASE READ THIS INTRODUCTION ALL

THE WAY THROUGH.

WHEN THE MACHINE IS DELIVERED:

Check the carton carefully for signs of damage and rough handling. Remove the machine from the carton.

If the machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep the

carton, packing list and carrier's receipt until the inspector has verified your claim.

Kent Investment's liability ceases when the shipment is picked up by the carrier, but our customer service

staff will be glad to furnish any information needed in connection with the claim and will expedite repair of

the machine.

BEFORE OPERATING THE MACHINE

Read the manual carefully before operating Model C-4. The manual has important information for the use

and safe operation of the machine. Keep this manual handy at all times. Model C-4 will assure years of

satisfactory service if operated and maintained according to recommendations in this manual. If additional

technical information is needed, please contact Kent Investment Corporation at 870.994.3535.

All information and specifications printed in this manual and parts list are current at the time of printing;

however, because of Kent Investment's policy of continual product improvement, we reserve the right to

make changes at any time without notice.

WARRANTY: See page 5 of this manual for limited warranty.

THIS MACHINE IS FOR COMMERCIAL USE.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including

the following:

READ ALL INSTRUCTIONS BEFORE USING MODEL C-4.

GENERAL INSTRUCTIONS

This floor finishing machine shall be grounded while in use to protect the operator from electric shock. The

machine is provided with a three-conductor cord and a three-contact grounding type attachment plug to fit

the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the

grounding wire. NEVER connect this wire to other than the grounding pin of the attachment plug.