Owner`s manual

7
7.0 Installation of the Cover
1. Place the cover on the spa. Be careful to consider the more logical sense to manipulate the cover.
2. Use the screws supplied with the cover to fix the fasteners on the sides of spa.
Tips:
-Place the cover on the spa when is not in use to reduce heating costs.
-The time required to heat the spa depends on the initial temperature of the water.
8.0 Control functions
Please look at the document supplied with your spa
9.0 Adjusting massage
Venturi Valves
Use the venturi valve to inject air into the hydro-jets. This allows make the massage more vigorous
and provides a little more power in the jet.
By turning the knob of the venturi valve it’s opening or closing on the injection of air.
The waterfall valve
Turn the valve to open or close the waterfall.
The different types of massage
Here are some examples of projects that you can find in your spa. This list is not exhaustive because
the array of jets evolves regularly. Some jets may be opened or closed independently. Simply turn the
contour of the jet and rotate in the direction of clockwise to close and in the other direction to open.
Jet Directional neck
It is possible to adjust the direction of the jet in handling the ball in the center of the jet. The jet can be
opened or closed
Mini-jet rotational relaxation
Mini-jet rotary massages a larger area. Although its primary function is the relaxation, it can also
provide massage. The jet can be opened or closed.