Owners manual

Installaon Manual

AquaJet Pro Medium Output Solar Pump Kit

AquaJet-Pro-Kit-12V-MedOutput-V4

Technical Specications

Solar Panel Peak Power 20W

Operating Voltage 18V

Water Lift Height (max) 6.9 ft

Flow Rate (max) 358.1 GPH

Cable Length 16.4 ft

Weight 12 lbs

Silicon Solar

2917 State Hwy 7

Bainbridge, MY 13733

P: 1.800.786.0329

www.SiliconSolar.com

* Prices and specicaons subject to change without noce

Read And Follow All Instrucons Before Operang Your Solar Light. Save This Manual For Future Reference.

1. The solar pump is designed for outdoor or indoor fountain use, and

is powered by a solar panel. In order to make the pump work by solar

energy, the solar panel needs to be placed in the sunlight with its solar

cells facing the sun as much as possible.

2. The performance of the pump depends on the sunlight intensity and

the incident angle at which sunlight strikes the panel surface.

3. The pump has the build-in function of dry-run protection. The dry-run

protection function is provided by two sensor points on one side of

the pump housing (referring to the right photo). The pump works if

both of the points are submerged in water. If either or both points

emerge out of water, the pump stops working.

4. The pump flow rate can be adjusted by the flow valve (referring to the

right photo).

5. The latest DC brushless motor technology is introduced in the pump

design and manufacturing, so that the pump has high efficiency and

long service life.

1. Overview

2. Components

1. Solar Panel (w/ ground stake)

2. Pump

3. Nozzles

4. Water Hose

PAGE 1
Installation Manual AquaJet Pro Medium Output Solar Pump Kit AquaJet-Pro-Kit-12V-MedOutput-V4 Read And Follow All Instructions Before Operating Your Solar Light. Save This Manual For Future Reference. Technical Specifications Solar Panel Peak Power 20W Operating Voltage 18V Water Lift Height (max) 6.9 ft Flow Rate (max) 358.1 GPH Cable Length 16.4 ft Weight 12 lbs 1. Overview 1. The solar pump is designed for outdoor or indoor fountain use, and is powered by a solar panel.
PAGE 2
Installation Manual AquaJet Pro Medium Output Solar Pump Kit AquaJet-Pro-Kit-12V-MedOutput-V4 3. Assembly Instructions 1. Unpack all components carefully. 2. For the application of pumping water for a water feature or water fall, connect the pump outlet to the water inlet of a garden water decoration or the headstream of your water fall with the attached soft water hose. 3.
PAGE 3
Installation Manual AquaJet Pro Medium Output Solar Pump Kit AquaJet-Pro-Kit-12V-MedOutput-V4 6. Troubleshooting *Pump does not operate even though the solar panel is in full sunlight. 1. No connection to the solar module—check the electrical connection between the pump and the solar module. 2. Impeller is blocked—to clean the pump as described in “CLEANING AND MAINTENANCE”. 3. To make sure the pump is totally submerged in water.