Instructions / Assembly

Customer Service 1•800•787•6649 19
Operate Your Spa
Personal Settings
Jets
Most jets in your spa are ad-
justable. Rotating the face of an
adjustable jet to the left
(counter-clockwise) will increase
the amount of water flow
through the jet. Rotating the face
of an adjustable jet to the right (clockwise) will de-
crease the amount of water flow through the jet.
Neck jets can
be turned on
and off using
the nearby
water on/off
knob.
Blower jets are not adjustable,
but can be turned on and off using
the Aux or Option button on
your Control Panel.
_________________________________________
Air Controls
Air controls are
the 2” knobs
located around
the top of your
spa. Each one
will let you add
a mixture of air with the jet pressure. This is accom-
plished by rotating the air control knob to the left
(counterclockwise) to increase the amount of air-
flow through the jets. To decrease the amount of air-
flow through the jets, rotate the handle to the right
(clockwise).
_______________________________________
Diverter Knobs (if equipped)
Diverter knobs are 3” knobs located around the
top of your spa. They allow you to divert water
through jets from one side of the spa to the other,
or in most cases from floor jets to wall jets. This is
accomplished by rotating the diverter knob to the
left (counterclockwise), decreasing the amount of
water flow through a section of jets. To increase the
amount of water flow
through the other section of
jets, rotate the handle to the
right (clockwise).
_________________________________________
Water Feature Controls (if equipped)
Some spas in-
clude waterfalls
and/orwater
columns. In-
crease or de-
crease the flow
of the waterfall using the 2” water on/off knob
nearest the water feature.
_________________________________________
Water Columns (if equipped)
IMPORTANT!
When spa session is over,
and before cover is closed,
these water features
MUST be turned off
using the water control
knob nearest the feature
or water will continue to
run through them, potentially
causing draining of your spa,
depending on how long they
are left on.