Spa Pre-Delivery Guide
Delivery... Your spa will be delivered curbside to your home. It is delivered on end, wrapped on a sturdy pallet for convenient placement. You will need to arrange to have your spa placed in your desired location. When your spa delivery company calls to set up a delivery appointment, you may choose to make arrangements with them to place your spa for an additional fee. If that is not a service they can provide, we recommend consulting professionals who have experience moving large items.
Consider the weight of the spa… When installing your spa on a deck or other structure, please consult a qualified contractor to ensure the structure will support the weight of your spa. To properly identify the weight of your new spa when full, remember water weighs 8.33 lbs. per gallon. For example, an average Strong acrylic spa holds approximately 350 gallons of water. Using this formula, you will find that the weight of the water alone is 2,916 lbs.
Electrical Requirements 120V Spas DO NOT USE A GFCI OUTLET with a GFCI CORD! A GFCI cord is supplied with your spa. Your spa must be wired with a GFCI either on the cord or on the outlet, but not both. Follow all local, state and federal electrical codes. Use only a line with a dedicated 15 Amp breaker. This line cannot be shared with any other appliances while the spa is running or the breaker will trip immediately.
Electrical Requirements 240V Spas Electrical connections must be made by qualified, licensed personnel. Improper installations present hazards, which can result in personal injury or property damage. Please contact a licensed residential electrician for these services. When installed in the United States, the electrical wiring of this spa must meet the requirements of the National Electric Code, and must meet any local, state and federal codes.
With planning and preparation, you will be sure to have a safe and successful delivery day! For more information, please contact the Customer Service Team 1-877-289-7727 email: support@strong9.