User's Manual

Activate your Device:
In order to use your valve, it must be activated first.
Please make sure that you’re within bluetooth range of your valve, and ideally be in the location
that the valve will be installed in order to ensure that the valve can connect to your WiFi or
LoRaWAN network.
1. From the main menu, choose “Activate New Devices”.
2. Then choose from the list of Activation Workflows.
3. Choose the Property & Location within your Property where you want to install your
device, and tap Next.
4. Enter or Scan the Valve serial number. You must enter the entire 9-digit serial number
found on the device OR you can scan the barcode located on the device by tapping
Scan Barcode. Once you’ve entered the serial number, tap Next and the app will
attempt to connect directly to the valve using bluetooth.
5. Once connected, you’ll see valve information and a “Complete” message in the app.
Tap Next.
6. Next you’ll need to Configure your valve settings.
a. Name your valve. Tip: Your valve name will be used in notifications along with
the property and location. Name your valve something unique or identifiable.
b. Enter your check-in interval. The Check-In interval determines how often the
valve checks in to the Cloud to report status and receive commands.
c. NOTE: If you’re on AC power we recommend 1 minute check-in so you can
control your valve in near real time. If you’re on battery only, speak with your
installer or sales rep for recommended check-in intervals.
d. Choose the primary use of for valve, along with the pipe size. Tap Next.
7. Configure your network settings.
a. For WiFi, enter the network name and password that is within range of the
valve’s installation location.
b. For LoRaWAN, your valve comes pre-configured to work with the provided
MultiTech Conduit Gateway.
c. Tap Next to continue.
8. Confirm Device Activation. If you’re only activating a valve, you’ll see the Confirmation
screen next. Confirm your settings by tapping CONFIRM to add your valve to the
chosen Property Location.
9. Confirm your Activation. Make sure your activation details look right and tap CONFIRM
to activate.
Aquana, LLC | www.aquana.com | 1-888-404-2782 (AQUA) | [e-mail]