User`s manual

27
3). Engine Start and Stop Button
To start engine, depress and hold the start button. Release immediately after engine
is started. To stop engine, fully release throttle lever then depress the stop button.
Remember to disconnect safety lanyard from its post.
4. Control Handle for jetSurf and Steering Handle for jetKayak and
jetNami
Operator grasps the control handle to keep balance and operates safety lanyard,
throttle lever, start and stop buttons.
The steering handle controls the direction of the watercraft. Turning the steering
handle to the right steers the watercraft to the right and inversely.
• Check steering handle and corresponding steering nozzle operation
before starting.
• Never turn steering handle while someone is nearby rear of watercraft.
• Keep away from steering moving parts (nozzle, linkage etc.).
WARNING
Steering handle of jetKayak Steering handle of jetNami
5. Armpole for jetSurf and Information Meter for jetKayak and jetNami
Armpole links control handle to board, and provides support to operator.
When safety Lanyard is plugged in and the start button is depressed once, the
information meter reads engine RPM, engine temperature, fuel level, and battery life.
Once stop button is depressed or safety Lanyard is pulled off, all the indicators will
be turned off.
!