User`s manual

37
Engine Coolant
Recommended Coolant:
Always use ethylene-glycol antifreeze containing corrosion inhibitors specifically for
internal combustion aluminum engines.
Cooling system must be filled with water and antifreeze solution (50% demineralized
water, 50% antifreeze), or premixed coolant with freezing protection.
NOTE: To prevent antifreeze deterioration, always use the same brand. Never mix
different brands unless cooling system is completely flushed and refilled.
Adding Coolant Procedure:
CAUTION:
• Ensure engine is cold.
• Open Coolant Fill/Pressure Control Cap.
• Slowly add coolant until it is full.
• Tighten the Cap.
• Adding coolant after the first time use.
• Check coolant level frequently with engine cold, especially after first
time use.
• Never add coolant in cooling system when engine is hot.
• Coolant is under pressure when engine is hot. Open coolant cap and
pressure control valve cap may cause severe burn and injury when
engine is hot.
WARNING
Fueling
Follow these safe boating fueling instructions carefully:
• Turn off engine.
• Do not insert the spout too far in filler neck.
• Pour fuel slowly so that air can escape from the tank and prevent fuel
flow back. Be careful not to spill fuel.
• Fully tighten fuel tank cap.
WARNING
!
!