User`s manual

44
10-Hour Inspection
It is highly recommended that after the first 10 hours of operation, the watercraft be
checked by an authorized Aquanami dealer. This inspection will also provide the
opportunity to discuss the unanswered questions you may have encountered during the first
hours of operation.
3) Use a proper oil pan to collect used oil to protect environment. Place it under the
access window to the engine oil drain plug.
4) Use the special wrench tool (supplied) to open the access window to engine oil drain
plug at bottom of hull. Keep the “O” ring for later use.
5) Use a 17mm socket wrench to open oil drain plug. There is a washer, a spring, oil
filter screen and a magnet came out with the oil drain plug. Put oil filter screen and
magnet in a cleaning container.
6) Drain dirty oil completely.
7) Clean oil filter screen and magnet.
8) Re-install back magnet, filter screen, washer and oil drain plug.
9) Close the access window cover. Make sure the “O” ring is in good condition and fit
into the cover.
10) Fill new engine oil to the right oil level.
CAUTION:
• Make sure the drain plug is properly secured after oil change. No oil leak!
• Make sure the access window is properly sealed with “O” ring and properly secured.
No water leak!
13. Oil Drain Plug
Access Window