User`s manual

46
PRE-OPERATION CHECK LIST
ITEM
TO DO
Start and Stop buttons
Check operation.
Safety Lanyard
Check operation.
Throttle
Check operation.
Steering system Check operation.
Armpole Check operation.
Exhaust pipe cooling
Check by-pass outlet. Water mist/drops should come
out exhaust by-pass outlet.
Bilge plugs Ensure plugs are secured.
Exhaust flush cap Ensure the cap is installed.
Battery
Inspect cables and retaining fasteners. Ensure good
condition and fully charged.
Fuel tank
Check/refill.
Engine compartment
Check if any water exists.
Check if any signs of water leak.
Check fuel line connections for tightness.
Verify for any fuel leak/odor as well as oil and coolant
leaks.
Check any loosen parts.
Engine oil level
Check/refill.
Engine coolant Check/refill.
Carburetor
Periodically drain water or contaminated fuel from the
carburetor bowl by loosening the carburetor drain
screw. Use a cup to collect the drained liquids. Ensure
the drain screw closed after cleaning.
Fuel water separator bottle
Periodically drain water or contaminated fuel from the
bottle.
Engine breathing oil retainer
Periodically drain the engine breathing oil retainer bottle
to clean oil/water residue.
Jet pump water intake Inspect/clean.
Jet pump water intake seal Inspect any damage or leak.
Access window to oil drain plug
Check the access window is properly sealed and
secured. No water leak.
Hull Inspect.
Dry storage compartment covers Ensure they are closed and properly sealed.