Manual

EN
25
Frequency:
Set the frequency according to your local power supply.
1. Press the left/right key to select the Frequency [HZ]
option.
2. Press the up/down keys make your selection.
3. Press the OK key to confirm and save your selection.
Format memory card:
See ‘Format Memory Card’ under the ‘First Steps’ section of
this manual.
Firmware / Factory reset:
Press the left/right key to select the Firmware option.
The LCD will display the firmware version currently
installed.
To reset the camera to the factory default settings:
Select the ‘Default Setting’ option.
Press Menu/OK
To continue press the Up key the select ‘YES’.
Press the Menu button to complete the camera reset.
Settings menu options differ depending on what mode
(Photo or Video) the camera is operating under when the
menu is accessed.
NOTICE