Manual

10
2
1
First steps: Preparing the camera for first use
Opening and Closing the battery
compartment:
Always ensure the camera and your hands are
dry.
Ensure that there is no debris inside the battery-chamber or
memory card slot.
Always ensure that the battery cover is firmly closed and the
security lock is in the lock position before using the camera.
1. Install battery and memory card
• Move the Lock/Unlock Switch on the battery cover to the
unlock position and open the battery cover by sliding it in the
direction of the arrow - see Fig 1.
• Insert the battery ensuring correct polarity and pin alignment
- see Fig 2.
• Insert the memory card as indicated – see Fig 3.
• Push the Micro SD card until you hear a slight clicking sound,
which confirms the SD card is correctly installed.
• Close the battery cover and push the Lock/Unlock switch to
the Lock position.
NOTICE