Installation Guide

GARDEN HOSE TIPS This hose is designed and manufactured to give you years of service. Here are a few

tips that will help maintain the initial quality of your hose:

• To help reduce kinking, fully extend your new hose and lay out flat in the sun. Run water through the

hose for 2-3 minutes.

• Never drag your hose over rough surfaces as this will cause scuffs and abrasions on the outer jacket of

the hose.

• When your hose is not in use, please make sure that you do not leave the hose under pressure.

• Always ensure that the washer inside the coupling is fitted correctly. This will eliminate leaks and lost

water pressure.

• It’s a good idea to connect the male and female end of the garden hose together to prevent spiders,

earwigs, or slugs from making a home inside your hose.

• Remove nozzles and/or sprinkler heads when you are done as water trapped inside the hose may

cause the nylon to stretch and expand.

PAGE 1
GARDEN HOSE TIPS This hose is designed and manufactured to give you years of service. Here are a few tips that will help maintain the initial quality of your hose: • To help reduce kinking, fully extend your new hose and lay out flat in the sun. Run water through the hose for 2-3 minutes. • Never drag your hose over rough surfaces as this will cause scuffs and abrasions on the outer jacket of the hose. • When your hose is not in use, please make sure that you do not leave the hose under pressure.