Use and Care Manual

MATERIALS REQUIRED (NOT INCLUDED)

NOTE: Parts shown below not to scale.

SPECIFICATIONS

Power supply

115V, 60 HZ., 15 Amp Circuit

Liquid temp. range

35°F to 77°F (1°- 25°C)

Discharge size

1-1/2 in. FNPT or 1-1/4 in. FNPT (with adaptor)

Sump basin

Min. 14 in. (356 mm) diameter, 18 in. (457 mm) depth for tethered switch

Min. 10 in. (254 mm) diameter, 14 in. (356 mm) depth for vertical switch

NOTE: Do not reduce size of discharge pipe or hose below 1-1/4 in. diameter. If discharge is too small, pump will

overheat and fail prematurely. This pump is designed for use in a residential sump only. Only pump water with this

pump.

INSTALLATION

Thread Tape

1-1/4” or 1-1/2”

check valve

Threaded Adapter

(Pipe to Pump)

1-1/4’’ or 1-1/2’’

ABS or PVC Pipe

ABS or PVC

Cement

(to match the pipe)

1-1/4” or

1-1/2”90°

Elbow