Instructions / Assembly

INSTALLATION

(SEE FIGURES 1 AND 2)

WARNING: Electric Shock Hazard. Plug pump into a properly grounded, GFCI protected outlet. Do NOT plug in

the pump until after it is completely installed. Do not remove or modify the grounding pins on the plugs.

Fittings Supplied: Qty.

A Sink Drain Screen 1

B 1-1/4” NPT x 1-1/4” Slip Check Valve 1

C 1-1/4” NPT Ball Valve 1

Purchase Separately: Qty.

1 1-1/2” NPT x 1-1/2” Slip Female Adapter 1

2 1-1/2” Schedule 40 PVC Pipe, to fit 1

3 1-1/2” NPT x 1-1/2” Slip Male Adapter 1

4 1-1/4” NPT Galvanized Nipple (to fit) 1

5 1-1/4” NPT Galvanized Union 1

6 1-1/4” NPT x 1-1/4” Male Adapter 1

7 1-1/4” Schedule 40 PVC Pipe, to fit 1

8 1-1/4” Socket to Socket 90° Elbow 1

9 1-1/4” Schedule 40 PVC Pipe to Drain As Needed

PVC Pipe Cement As Needed

PTFE pipe thread sealant tape As Needed

1-1/2” PVC Solvent Union – optional As Needed

NOTE: Be careful to avoid cross-threading; Use only a

plastic-compatible pipe-threading compound or teflon

tape when connecting threaded fittings to plastic

adapters.

Figure 1: Typical method of mounting the pump