Instructions / Assembly

At a Glance:

• Polyethylene Outer Shell

• PolyKLEAN

™

Center Core

• Granular Activated Carbon

Applications:

• Sediment/Rust*

• Chlorine Taste and Odor*

Product Beneﬁ ts:

• 25 micron sediment is captured on the rigid polyethylene outer shell

• 40,000 gallon carbon reduction capacity at 10 gpm provides up to 6 months service

for all your home’s water

• Radial ﬂ ow design allows for use of ﬁ ner, more effective activated carbon and

yields a very low pressure drop

• Double open ended design ﬁ ts most large diameter housings. Cartridge will ﬁ lter

water regardless of which way it is installed in housing

• Neoprene gaskets on both top and bottom provide exceptional sealing in any hous-

ing, helping to prevent bypass of unﬁ ltered water down-stream

Models:

AP817 / AP817-2

Whole House Water Filters

Product Speciﬁ cations:

Model No.

(Part No.)

Dimensions

Flow Rate Max. Water Temp. Degree of Filtration

Height Diameter

AP817

(56027-01)

9-7/8” (25.1 cm) 4-5/8” (11.7 cm) 10 gpm (37.9 lpm) 100°F (37.8°C) 25 micron nominal

AP817-2

(56027-07)

20-1/8” (51.1 cm) 4-5/8” (11.7 cm) 20 gpm (75.7 lpm) 100°F (37.8°C) 25 micron nominal

Spec #

Quantity

AP817

AP817-2

* Claims not tested or certiﬁ ed by NSF

PAGE 1
Models: AP817 / AP817-2 Whole House Water Filters Spec # Quantity Applications: At a Glance: • Sediment/Rust* • Polyethylene Outer Shell • Chlorine Taste and Odor* • PolyKLEAN™ Center Core • Granular Activated Carbon Product Benefits: • 25 micron sediment is captured on the rigid polyethylene outer shell • 40,000 gallon carbon reduction capacity at 10 gpm provides up to 6 months service for all your home’s water • Radial flow design allows for use of finer, more effective activated carbon and yield
PAGE 2
Spec # Quantity Model Number 4-5/8” (11.7 cm) Part Number 4-5/8” (11.7 cm) Physical Specifications: 20-1/8” (51.1 cm) 9-7/8” (25.1 cm) • Cartridge is manufactured from FDA CFR-21 compliant materials • Cartridge has a maximum operating temperature of 100°F (37.8°C) • Cartridge to be installed at point of entry Fits all CUNO and most competitive filter housings AP817 AP817 AP817-2 AP801 AP802 AP801-C AP802-1.5-C AP801T-C AP801-1.