Pre-Delivery/Install Checklist

Site Selection
Before proceeding, please read the “Important Safety Instructions” at the
beginning of the owner’s manual.
1. Electrical Connection. For 120V models, plug in to a 15A dedicated outlet and you are
ready to enjoy. The electrical cord is 12' long so it needs to be close enough to plug directly into a 3
prong grounded outlet. Do not use an extension cord. For 240V models, Electrical installation
must be completed by a qualified certified licensed electrician in compliance with all codes.
2. No Overhead Power Lines. Do not locate your spa under overhead power lines or in
near proximity to existing buried or exposed electrical circuits. See your electrician.
3. Childproof Your Spa. Plan for limiting access of children. Precautions such as self closing
and locking gates or access doors, fencing and other child barriers, as dictated by the site.
4. UL Safety Cover Required. In addition to its insulating factors, a good cover also provides
a measure of additional protection from unwanted access. Your Aqua Rest cover is classified by the
Underwriters Laboratories meeting ASTM F1346-91 requirements.
CAUTION: Your spa must be installed on a level, flat, solid load-bearing surface. Do not locate the
spa on a surface that can be damaged or altered by water.