Pre-Delivery/Install Checklist
Electrical Requirements - 220V Upgrade Conversion
● 240V electrical connections must be
completed by a Certified Licensed
Electrician.
● A G.F.C.I. AND A DISCONNECT
SWITCH ARE REQUIRED: The National
Electrical Code requires that spas connected to
240 Volt circuits be equipped with a “G.F.C.I.” and
Disconnect Switch. See National Electric Code
Articles 680-12 and 680-42.
● ISOLATED, DEDICATED 240 VOLT, 30
OR 50 AMP CIRCUITS ARE REQUIRED
● All 240 Volt operations wiring must be
permanently hardwired, installed in
grounded conduit and installed in
compliance with the National Electrical
Code and all local codes.
● WARNING: USE COPPER
CONDUCTORS ONLY!