Installation Guide

ManualsBrandsAquaRest Spas ManualsOtherAR-200P 4-Person Spa with Ozone, Heater and 14 Jets in Stainless Steel, and LED Waterfall in Cobblestone (240-Volt)

1

2

3

4

5

6

Electrical Requirements - 220V Upgrade Conversion

● 240V electrical connections must be

completed by a Certified Licensed

Electrician.

● A G.F.C.I. AND A DISCONNECT

SWITCH ARE REQUIRED: The National

Electrical Code requires that spas connected to

240 Volt circuits be equipped with a “G.F.C.I.” and

Disconnect Switch. See National Electric Code

Articles 680-12 and 680-42.

● ISOLATED, DEDICATED 240 VOLT, 30

OR 50 AMP CIRCUITS ARE REQUIRED

● All 240 Volt operations wiring must be

permanently hardwired, installed in

grounded conduit and installed in

compliance with the National Electrical

Code and all local codes.

● WARNING: USE COPPER

CONDUCTORS ONLY!